How to remove and install the hood on Toyota T100?

The hood is somewhat awkward to remove and install, so at least two people should perform this procedure. Begin by opening the hood and placing rags or covers over the windshield and fenders to protect them during removal. Disconnect the windshield washer fluid lines before detaching the hood. Mark the relationship of the hood to the hinges before removing the hood hinge bolts. Remove the hood retaining bolts and lift off the hood, placing a shop rag under the corners to protect the paint, while having an assistant support one side. Installation follows the reverse order of removal. If necessary after installation, the entire hood latch assembly can be adjusted up-and-down and side-to-side on the upper radiator support to ensure the hood closes securely and is flush with the fenders. Scribe a line around the hood latch mounting bolts for reference, then loosen the bolts and reposition the latch as needed, retightening the bolts afterward. Finally, adjust the hood bumpers on the radiator support to ensure the hood is flush with the fenders when closed, and periodically lubricate the hood latch and hinges with white lithium-based grease to prevent sticking and wear.

Genuine Toyota T100 Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood found

View related parts
Toyota T100 Hood Sub-Assembly
Part Number: 53301-34010
Product Specifications
- Other Name: Hood Sub-Assy; Hood
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1998 Toyota T100 | DLX, SR5, STD | 4 Cyl 2.7L, 6 Cyl 3.0L, 6 Cyl 3.4L | 3RZFE, 3VZE, 5VZFE; RCK10L-TRMRKA, RCK10L-TRSRKA, VCK10L-THMREA, VCK10L-THSREA, VCK10L-TRMREA, VCK10L-TRMREK, VCK10L-TRMSEA, VCK10L-TRMSEK, VCK10L-TRSREA, VCK10L-TRSREK, VCK10L-TRSSEA, VCK10L-TRSSEK, VCK11L-CRMDKA, VCK11L-CRMDKK, VCK11L-CRMSKA, VCK11L-CRSDKA, VCK11L-CRSDKK, VCK11L-CRSSKA, VCK11L-THMDKA, VCK11L-THSDKA, VCK11L-TRMDKA, VCK11L-TRMDKK, VCK11L-TRMRKA, VCK11L-TRMSKA, VCK11L-TRSDKA, VCK11L-TRSDKK, VCK11L-TRSSKA, VCK20L-TRMREA, VCK20L-TRMREK, VCK20L-TRMSEA, VCK20L-TRMSEK, VCK20L-TRSREA, VCK20L-TRSREK, VCK20L-TRSSEA, VCK20L-TRSSEK, VCK21L-CRMDKA, VCK21L-CRMDKK, VCK21L-CRMSKA, VCK21L-CRMSKK, VCK21L-CRSDKA, VCK21L-CRSDKK, VCK21L-CRSSKA, VCK21L-CRSSKK, VCK21L-TRMDKA, VCK21L-TRMDKK, VCK21L-TRMSKA, VCK21L-TRMSKK, VCK21L-TRSDKA, VCK21L-TRSDKK, VCK21L-TRSSKA, VCK21L-TRSSKK

Toyota T100 Hood

The function of the Toyota T100 Hood is to shield your engine from dirt, water, and flying road debris while allowing drivers to conveniently lift the Hood open for a quick inspection or tune-up. This hinged panel, typically stamped with sturdy steel on early T100 pickups, subsequently appeared in lighter aluminum and even fiberglass, balancing strength and weight to enhance efficiency and crumple performance in a crash. The Hood, regardless of material, attaches with hidden hinges near the cowl and locks at the nose so it stays in place over bumpy trails but opens wide when you release the latch and safety catch. The contours of each Hood style have been kept the same for proper airflow, while some trims saw the introduction of a sport Hood with subtle rear scoops for added ventilation. Toyota owners note that it has a simple two-stage latch that prevents accidental pop-ups at speed. This has been a feature with every Toyota release of the model. Choosing the right Hood for any T100 build is largely a matter of matching year, mounting points, and finish.

If you are in demand for superior quality and affordable OEM Toyota T100 Hood, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Hood. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota T100 Hood Parts Questions & Experts Answers

Hood Sub-Assembly
53301-34010
Q: How to remove and install the hood on Toyota T100?
A:
The hood is somewhat awkward to remove and install, so at least two people should perform this procedure. Begin by opening the hood and placing rags or covers over the windshield and fenders to protect them during removal. Disconnect the windshield washer fluid lines before detaching the hood. Mark the relationship of the hood to the hinges before removing the hood hinge bolts. Remove the hood retaining bolts and lift off the hood, placing a shop rag under the corners to protect the paint, while having an assistant support one side. Installation follows the reverse order of removal. If necessary after installation, the entire hood latch assembly can be adjusted up-and-down and side-to-side on the upper radiator support to ensure the hood closes securely and is flush with the fenders. Scribe a line around the hood latch mounting bolts for reference, then loosen the bolts and reposition the latch as needed, retightening the bolts afterward. Finally, adjust the hood bumpers on the radiator support to ensure the hood is flush with the fenders when closed, and periodically lubricate the hood latch and hinges with white lithium-based grease to prevent sticking and wear.