My Garage
My Account
Cart
Genuine Toyota T100 Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Hood Cables found
Toyota T100 Hood Lock Control Cable Assembly
Part Number: 53630-34010$40.57 MSRP: $56.70You Save: $16.13 (29%)Ships in 1-3 Business Days
Toyota T100 Hood Lock Control Lever Sub-Assembly
Part Number: 53601-89103-B0$73.38 MSRP: $103.44You Save: $30.06 (30%)Ships in 1-3 Business DaysToyota T100 Hood Lock Control Lever Sub-Assembly
Part Number: 53601-89103-B1$73.38 MSRP: $103.44You Save: $30.06 (30%)Ships in 1-3 Business DaysToyota T100 Hood Lock Control Lever Sub-Assembly
Part Number: 53601-89103-E2$73.38 MSRP: $103.44You Save: $30.06 (30%)Ships in 1-3 Business DaysToyota T100 Hood Lock Control Lever Sub-Assembly
Part Number: 53601-89103-J0$73.38 MSRP: $103.44You Save: $30.06 (30%)Ships in 1-3 Business Days
Toyota T100 Hood Cable
The Hood Cable connects the hood release handle from the cabin of the Toyota T100 to the latch on the hood. This allows the driver to pop the hood with a tug on the release handle from the cabin. It allows quick access to the engine bay for checks or repairs. Each T100 truck employs a flexible steel core running in a protective sheath from the dashboard lever to a junction near the grille. From there, branch lines extend to each latch. When the driver pulls the lever, the Hood Cable withdraws the latches, freeing the panel. Throughout the production run, Toyota did not make any drastic redesign; however, there are two functional layouts. Early builds had a single continuous Hood Cable, whereas later builds were outfitted with a split layout that uses a main lead plus short secondary leads to dual latches, thereby improving pull across the wider hood. In any design, exposure to heat, road grit, and moisture can cause the outer sheath to crack, allowing water to seep in and stretch or rust the inner wire, leaving the hood stuck shut. The routine inspection and timely replacement of a frayed Hood Cable will keep the Toyota T100 ready for hassle-free maintenance. Additionally, the Hood Cable is essential for ensuring the proper function of the hood release system.
If you are in demand for superior quality and affordable OEM Toyota T100 Hood Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Hood Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota T100 Hood Cable Parts Questions & Experts Answers
- Q: How to remove and replace the Hood Cable and Hood Latch on Toyota T100?A:On some models, it may be necessary to remove the Grille. Mark the edge of the latch in relationship to the radiator support before unbolting it. Unbolt the latch, and to detach the hood latch, remove the retaining bolts. Detach the cable from the latch assembly by flipping the latch over and prying the end of the cable out. If replacing the latch, installation is the reverse of removal; to adjust the latch, loosen the bolts slightly and move it as necessary, then tighten the bolts securely. If replacing the Hood Cable, trace it back toward the firewall and detach all cable brackets and clips in the engine compartment. Working in the passenger compartment, remove the left lower finish panel and detach the hood lever from the instrument panel by lifting the release lever and removing the retaining screws. Detach the hood lever from the cable, then attach a piece of string or thin wire to the end of the cable and pull the cable and grommet into the engine compartment. Installation is the reverse of removal.
