My Garage
My Account
Cart
Genuine Toyota T100 Intake Valve
Engine Intake Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Intake Valves found
Toyota T100 Intake Valve
Part Number: 13711-75060$16.41 MSRP: $22.94You Save: $6.53 (29%)Ships in 1-3 Business Days
Toyota T100 Intake Valve
Part Number: 13711-62030$13.91 MSRP: $19.45You Save: $5.54 (29%)Ships in 1-3 Business Days
Toyota T100 Intake Valve
Part Number: 13711-65010$29.62 MSRP: $41.40You Save: $11.78 (29%)Ships in 1-3 Business Days
Toyota T100 Intake Valve
The Toyota T100 Intake Valve provides fuel-air mixture into the combustion chamber and closely shuts to hold compression for the generation of power. The Intake Valve opens when a camshaft lobe acts via the valvetrain and closes when its spring forces it back against the seat, the timed flow needed by every Toyota cylinder. The closure of the Intake Valve occurs at a force of roughly 70 to 90 pounds. However, when the valve is open, the force is about 200 pounds or higher. This prevents valve float that would permit the Intake Valve to remain open at high speed. The Intake Valve may deform or get damaged due to weak springs leading to misfire, or overheating, or due to excessive clearance leading to piston contact or power loss. When the valve is damaged, the spring and guide clips are removed, along with the worn valve, to allow for a cleaned replacement to be inserted and re-assembled and checked for correct seating. The restoration of a dependable seal allows the Toyota T100 to obtain dependable combustion. This helps ensure the Toyota T100 performs to specifications while protecting the engine parts.
If you are in demand for superior quality and affordable OEM Toyota T100 Intake Valve, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Intake Valve. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota T100 Intake Valve Parts Questions & Experts Answers
- Q: Should Exhaust Valve and Intake Valve job be performed by a professional on Toyota T100?A:Because of the kind of job involved and the tools, and equipment needed for the job including the servicing of the valves, valve seats, and the valve guides which is normally referred to as the valve job, should always be done by a professional mechanic. An individual working at home can unbolt it and take off the head(s), it is then possible for him to do initial washing and assessments on it and bolt it back before taking it to a dealer service department, or an automotive machine shop for the actual work to be done on it. Performance of the inspection enables determination of the state of the heads and other valve train parts, for recognition of the needed works and new parts when interacting with an automotive machine shop. The dealer service department or the automotive machine shop, will have the valves and springs pulled out, the valves and seats will either be reconditioned or replaced, the guides will be reconditioned, the springs, spring retainers and keepers will be inspected for replacement if necessary, the seals usually will be replaced with new ones, the reassembled valve components as well as checking to ensure that the keeper and installed spring height is correct. Also, if the cylinder head gasket surface is altered, then it will be reconditioned to rectify the problem of warping. When the valve job is done by a professional, the head or any number of heads will be rather like new. Before fitting them back on the engine after use, they should be cleaned again for the removal of any metal pieces and grit that may remain from valving service or head Squaring operations respectively and by use of a blast of compressed air if possible to clear all oil ways or passage.
