My Garage
My Account
Cart
Genuine Toyota T100 Exhaust Valve
Exhaust Muffler Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Exhaust Valves found
Toyota T100 Exhaust Valve
Part Number: 13715-62050$19.50 MSRP: $27.26You Save: $7.76 (29%)Ships in 1 Business Day
Toyota T100 Exhaust Valve
Part Number: 13715-75050$21.29 MSRP: $29.75You Save: $8.46 (29%)Ships in 1-3 Business Days
Toyota T100 Exhaust Valve
Part Number: 13715-65010$22.72 MSRP: $31.75You Save: $9.03 (29%)Ships in 1-3 Business Days
Toyota T100 Exhaust Valve
The Exhaust Valve in a Toyota T100 opens after the completion of the power stroke to throw out the burnt gases from the combustion chamber. After this, it allows entry of fresh mixture on the coming cycle. The valve spring puts enough pressure on the Exhaust Valve to keep it sealed during compression. Its camshaft lobe acts through the valvetrain to open the Exhaust Valve and close it. Correct coil spring seat pressure of 70 to 90 pounds is essential for the control of the Toyota T100 Exhaust Valve to help avoid misfire or power loss from valve float at high engine speeds. Furthermore, open pressure must exceed 200 pounds. Excess lash caused by worn lifters, pushrods, or rocker arms can amplify the impact force every time the Exhaust Valve operates, causing pushrods to bend or rocker arms to fail. Heat is still the prevalent risk. Continued high temperatures may burn, distort, or crack the valve, reducing engine power and causing the engine to idle roughly while increasing fuel consumption. A dependable seal maintains compression and overall efficiency of the Toyota T100.
If you are in demand for superior quality and affordable OEM Toyota T100 Exhaust Valve, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Exhaust Valve. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota T100 Exhaust Valve Parts Questions & Experts Answers
- Q: Should Exhaust Valve and Intake Valve job be performed by a professional on Toyota T100?A:Because of the kind of job involved and the tools, and equipment needed for the job including the servicing of the valves, valve seats, and the valve guides which is normally referred to as the valve job, should always be done by a professional mechanic. An individual working at home can unbolt it and take off the head(s), it is then possible for him to do initial washing and assessments on it and bolt it back before taking it to a dealer service department, or an automotive machine shop for the actual work to be done on it. Performance of the inspection enables determination of the state of the heads and other valve train parts, for recognition of the needed works and new parts when interacting with an automotive machine shop. The dealer service department or the automotive machine shop, will have the valves and springs pulled out, the valves and seats will either be reconditioned or replaced, the guides will be reconditioned, the springs, spring retainers and keepers will be inspected for replacement if necessary, the seals usually will be replaced with new ones, the reassembled valve components as well as checking to ensure that the keeper and installed spring height is correct. Also, if the cylinder head gasket surface is altered, then it will be reconditioned to rectify the problem of warping. When the valve job is done by a professional, the head or any number of heads will be rather like new. Before fitting them back on the engine after use, they should be cleaned again for the removal of any metal pieces and grit that may remain from valving service or head Squaring operations respectively and by use of a blast of compressed air if possible to clear all oil ways or passage.
