How to replace the Automatic Transmission Output Shaft Seal on Toyota Tacoma?

Leaking of oil is observed mostly around the extension housing Automatic Transmission Output Shaft Seal and since this can be replaced easily without having to uninstall the transaxle from the car. The extension housing Automatic Transmission Output Shaft Seal is sited at the very end of the transverse part of the body of the transmission where shaft drives are fixed. To start off, lift the car and place it on jackstands properly so that all the wheels are off the ground. If the seal is leaking, Transmission lubricant will leak on the front of the drive shaft and may drop from the rear end of the transmission. Next, remove the driveshaft. With the help of a puller or a seal remover tool, it might be removed from the rear part of the transmission, being cautious not to harm the spirals on the end of the transmission output shaft. For fitting the new Automatic Transmission Output Shaft Seal, get a piece of pipe or a very large deep socket as a driver which should be struck into the bore square and to its full depth. Apply thin Sleek grease to the splines of the transmission output shaft and the external circumferences of the driveshaft slip yoke, before reinserting the driveshaft, it will be important not to scratch the new lip of the seal that comes with the new driveshaft. Last of all, check the conditioner level in the transmission and refill as is proper.

Genuine Toyota Tacoma Automatic Transmission Output Shaft Seal

AT Driveshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Output Shaft Seals found

View related parts
Toyota Tacoma Seal, Type V Oil
Part Number: 90312-23001
$3.92 MSRP: $5.47
You Save: $1.55 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil(For Transfer Output Shaft Companion Flange)
- Replaces: 90312-T0004
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2023 Toyota Tacoma | Base, DLX, Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE, 2TRFE; GRN225L-CRFDKA, 3RZFE, 5VZFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB
View related parts
Toyota Tacoma Seal, Dust
Part Number: 90303-38010
$3.44 MSRP: $4.81
You Save: $1.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Dust (For Automatic Transmission Extension Housing)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.4L | 2RZFE, 3RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Type T Oil Seal
Part Number: 90311-41015
$17.84 MSRP: $24.93
You Save: $7.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil (For Front Differential Carrier); Pinion Seal
- Manufacturer Note: LIMITED PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2025 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE, T24; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA, TZNA40L-PRZSZA, TZNA41L-PRZSTA, TZNA45L-PRFSZA, TZNA45L-PRZSZA, TZNA46L-PRZSTA

Toyota Tacoma Automatic Transmission Output Shaft Seal

If you are in demand for superior quality and affordable OEM Toyota Tacoma Automatic Transmission Output Shaft Seal, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Automatic Transmission Output Shaft Seal. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Automatic Transmission Output Shaft Seal Parts Questions & Experts Answers

Seal, Type V Oil
90312-23001
Q: How to replace the Automatic Transmission Output Shaft Seal on Toyota Tacoma?
A:
Leaking of oil is observed mostly around the extension housing Automatic Transmission Output Shaft Seal and since this can be replaced easily without having to uninstall the transaxle from the car. The extension housing Automatic Transmission Output Shaft Seal is sited at the very end of the transverse part of the body of the transmission where shaft drives are fixed. To start off, lift the car and place it on jackstands properly so that all the wheels are off the ground. If the seal is leaking, Transmission lubricant will leak on the front of the drive shaft and may drop from the rear end of the transmission. Next, remove the driveshaft. With the help of a puller or a seal remover tool, it might be removed from the rear part of the transmission, being cautious not to harm the spirals on the end of the transmission output shaft. For fitting the new Automatic Transmission Output Shaft Seal, get a piece of pipe or a very large deep socket as a driver which should be struck into the bore square and to its full depth. Apply thin Sleek grease to the splines of the transmission output shaft and the external circumferences of the driveshaft slip yoke, before reinserting the driveshaft, it will be important not to scratch the new lip of the seal that comes with the new driveshaft. Last of all, check the conditioner level in the transmission and refill as is proper.