How should the Coolant Temperature Sensor be handled and replaced on 2005 through 2009 Toyota Tacoma?

Be very careful with the Engine Coolant Temperature (ECT) sensor since any damage to it will impact on the operation of the entire fuel injection system. Start by removing the engine coolant until the standard is only beneath the ECT sensor. As for V6 models, the engine cover must be unbolted, as well as the electrical connector of ECT sensor, which is situated on the rear crossover of the cylinder heads. Remove the ECT sensor from the coolant crossover by unscrewing it with help of a deep socket. To avoid anticoolant leakage after the installation of the new ECT sensor, its threads should be first wrapped with Teflon tape. As mentioned earlier removal is the opposite of installation where the bolts holding the ECT sensor must be tightened to the recommended torque. The last step is to replace/overflow the cooling system. For four cylinders: connect the electrical connector of the ECT sensor at the left rear corner of the cylinder head removed the ECT sensor from the front coolant crossover with a deep socket ; before installing a new ECT sensor, it is necessary to wrap the threads of the new sensor with Teflon tape; then, follow the reverse instruction, tighten the bolts to the specified torque before refilling the cooling system.

Genuine Toyota Tacoma Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Coolant Temperature Sensors found

View related parts
Toyota Tacoma Sensor, Water Temperature
Part Number: 89422-35010
$63.12 MSRP: $88.98
You Save: $25.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature (For E.F.I.)
- Comment: (FOR E.F.I.)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.4L | 2RZFE, 3RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Sensor, Water Temperature
Part Number: 89422-33030
$63.12 MSRP: $88.98
You Save: $25.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature (For E.F.I.); Coolant Temperature Sensor, Temperature Sensor
- Comment: (FOR E.F.I.)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2025 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE, T24; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA, TZNA40L-PRZSZA, TZNA41L-PRZSTA, TZNA45L-PRFSZA, TZNA45L-PRZSZA, TZNA46L-PRZSTA
View related parts
Toyota Tacoma Sensor, Oil Temperature
Part Number: 89429-53010
$95.93 MSRP: $135.22
You Save: $39.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Temperature; Temperature Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2020 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Sensor, Water Temper
Part Number: 89422-33040
$60.99 MSRP: $85.98
You Save: $24.99 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: MEXICO SPEC
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2024-2025 Toyota Tacoma | 4 Cyl 2.4L | T24; TZNA40L-PRZSZA, TZNA41L-PRZSTA, TZNA45L-PRFSZA, TZNA45L-PRZSZA, TZNA46L-PRZSTA
View related parts
Toyota Tacoma Sensor, Water Temper
Part Number: 89422-47010
$63.47 MSRP: $89.48
You Save: $26.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature (For E.F.I.); Coolant Temperature Sensor, Temperature Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2023 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA

Toyota Tacoma Coolant Temperature Sensor

The coolants temperature sensor in Toyota Tacoma is an important device to monitor the temperature of the engine coolant to maintain it at the most effective condition it need to run. This sensor is relevant to measure fundamental parameter used to address the issue of controlling the performance and fuel consumption of the engine. Many kinds of Coolant Temperature Sensors have been used on Tacoma models in the past; each of them is intended to perform the same basic task but can be made of different materials or use different technology. These variations may be in the sensitivity or the response times in which they are able to deliver temperature information back to the engine control unit. In summary, Coolant Temperature Sensor has an essential role in safeguarding the general wellbeing and efficacy of the Toyota Tacoma vehicles' engine.

If you are in demand for superior quality and affordable OEM Toyota Tacoma Coolant Temperature Sensor, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Coolant Temperature Sensor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Coolant Temperature Sensor Parts Questions & Experts Answers

Sensor, Water Temperature
89422-33030
Q: How should the Coolant Temperature Sensor be handled and replaced on 2005 through 2009 Toyota Tacoma?
A: Be very careful with the Engine Coolant Temperature (ECT) sensor since any damage to it will impact on the operation of the entire fuel injection system. Start by removing the engine coolant until the standard is only beneath the ECT sensor. As for V6 models, the engine cover must be unbolted, as well as the electrical connector of ECT sensor, which is situated on the rear crossover of the cylinder heads. Remove the ECT sensor from the coolant crossover by unscrewing it with help of a deep socket. To avoid anticoolant leakage after the installation of the new ECT sensor, its threads should be first wrapped with Teflon tape. As mentioned earlier removal is the opposite of installation where the bolts holding the ECT sensor must be tightened to the recommended torque. The last step is to replace/overflow the cooling system. For four cylinders: connect the electrical connector of the ECT sensor at the left rear corner of the cylinder head removed the ECT sensor from the front coolant crossover with a deep socket ; before installing a new ECT sensor, it is necessary to wrap the threads of the new sensor with Teflon tape; then, follow the reverse instruction, tighten the bolts to the specified torque before refilling the cooling system.