How to replace a fuel filter on Toyota Tacoma?

Leave your engine to cool for at least three hours before starting any work. Before you work on the filter, put a metal container, rags, or newspapers under the filter to trap fuel spillage. Relieve the fuel system pressure. Lift your Tacoma and slide under to reach the fuel filter. Unscrew the black bolts from the tank ends of the filter, then disconnect both supply lines while remembering where they went. Lift out the bracket bolts to remove the old filter and let go of its support bracket. Before you detach the filter from its bracket, unscrew the clamp bolt and make sure to label where the inlet and outlet lines were connected. Be sure to have the filter's flanged end facing downwards when doing so. Put the new filter piece in place with the holder. Then, tighten the holder bolts firmly but check the flange goes down as required. Set up both the inlet and outlet connections by adding filter manufacturer-recommended seal washers to the banjo bolts. Then, tighten each bolt to the correct bolt torque spec. Once you've finished taking out the old filter, you start putting the new one back in place.

Genuine Toyota Tacoma Fuel Filter

Gas Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Filters found

View related parts
Toyota Tacoma Fuel Filter(For Efi)
Part Number: 23300-62010
$36.88 MSRP: $51.54
You Save: $14.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel(For Efi); Fuel Filter
- Comment: (FOR EFI)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.4L | 2RZFE, 3RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Fuel Filter(For Efi)
Part Number: 23300-79446
$36.88 MSRP: $51.54
You Save: $14.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel(For Efi); Fuel Filter
- Comment: (FOR EFI)
- Replaces: 23300-79445
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.4L | 2RZFE, 3RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Fuel Filter Pump
Part Number: 23217-0C010
$17.95 MSRP: $25.08
You Save: $7.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.4L, 4 Cyl 2.7L, 6 Cyl 3.4L | 2RZFE, 3RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB

Toyota Tacoma Fuel Filter

The Fuel Filter in Toyota Tacoma vehicles is very vital since it protects the engine from impurities like dirt, debris, and rust that may be present in fuel. With the help of the cartridge type pleated filter paper, the Fuel Filter helps in filtering out the unwanted particles thus improving the performance and efficiency of the engine. It is thus important to carry out regular cleaning in order to avoid blockage which may hindar fuel circulation and thus affect the performance of the engine. For the years of service, Tacoma models have incorporated such Fuel Filters as cartridge filters and bowl-like filters for diesel engines. The latter can collect, as well as drain, water thus protecting the fuel system and may contain features such as water switches and fuel warmers for enhanced performance in cold climates. In conclusion, it is crucial for the Fuel Filter to be a part of the Tacoma's engine system because of its importance in its overall performance.

If you are in demand for superior quality and affordable OEM Toyota Tacoma Fuel Filter, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Fuel Filter. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Fuel Filter Parts Questions & Experts Answers

Fuel Filter Pump
23217-0C010
Q: How to replace a fuel filter on Toyota Tacoma?
A: Leave your engine to cool for at least three hours before starting any work. Before you work on the filter, put a metal container, rags, or newspapers under the filter to trap fuel spillage. Relieve the fuel system pressure. Lift your Tacoma and slide under to reach the fuel filter. Unscrew the black bolts from the tank ends of the filter, then disconnect both supply lines while remembering where they went. Lift out the bracket bolts to remove the old filter and let go of its support bracket. Before you detach the filter from its bracket, unscrew the clamp bolt and make sure to label where the inlet and outlet lines were connected. Be sure to have the filter's flanged end facing downwards when doing so. Put the new filter piece in place with the holder. Then, tighten the holder bolts firmly but check the flange goes down as required. Set up both the inlet and outlet connections by adding filter manufacturer-recommended seal washers to the banjo bolts. Then, tighten each bolt to the correct bolt torque spec. Once you've finished taking out the old filter, you start putting the new one back in place.