My Garage
My Account
Cart
Genuine Toyota Tercel Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Accelerator Cables found
Toyota Tercel Throttle Cable Assembly
Part Number: 35520-16160$77.29 MSRP: $108.95You Save: $31.66 (30%)Ships in 1-3 Business Days
Toyota Tercel Cable Assy, Accelerator Control
Part Number: 78180-16440$119.84 MSRP: $170.38You Save: $50.54 (30%)
Toyota Tercel Accelerator Cable
The Accelerator Cable in the Toyota Tercel converts the pressure applied by the driver's foot to throttle movement, allowing the engine to breathe and respond quickly. The accelerator pedal of the Toyota is connected to the throttle plate through stranded steel wire within a flexible sheath. As you push the accelerator pedal, the throttle plate will open smoothly without any friction against the sheath. This will draw in extra air from the carburetor and later the throttle body in Toyota engine bays. This Accelerator Cable enables the synchronization of plate angle and fuel flow to maintain working engine vacuum and atmospheric pressure, promoting clean combustion and lively engine acceleration. The early Tercel versions with carburetors applied a simple Accelerator Cable that clipped straight onto the throttle lever. Fuel-injected versions maintained the same basic design but got better lining material and bent routing to suit the redone intake for reduced wear and shortened pedal travel. The two types differ mainly in length, end fittings, and the composition of the sheath, but all Accelerator Cables have a simple pull and release action that the driver feels. Inspections of the Accelerator Cable for fraying or sticking help any Toyota enthusiast keep a trusty Tercel responsive on the road. The Accelerator Cable's reliability is crucial for optimal performance.
If you are in demand for superior quality and affordable OEM Toyota Tercel Accelerator Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tercel Accelerator Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Tercel Accelerator Cable Parts Questions & Experts Answers
- Q: How to remove the accelerator cable on Toyota Tercel?A:To remove the accelerator cable, start by disconnecting it from the battery's negative terminal. Loosen the locknut on the cable at the throttle body and rotate the throttle lever arm to create slack. Remove the cable end from the arm and detach it from the accelerator pedal. Pull the cable through the casing from inside the vehicle. To install, reverse the removal steps. To adjust, fully depress the accelerator pedal and check if the throttle is fully opened. If not, loosen the locknuts, adjust the cable, and tighten the locknuts. Ensure the throttle closes fully when the pedal isn't depressed.
Related Toyota Tercel Parts
Toyota Tercel Carburetor
Toyota Tercel Carburetor Float
Toyota Tercel Carburetor Gasket Kit
Toyota Tercel Carburetor Needle And Seat Assembly
Browse by Year
1999 Accelerator Cable 1998 Accelerator Cable 1997 Accelerator Cable 1996 Accelerator Cable 1995 Accelerator Cable 1994 Accelerator Cable 1993 Accelerator Cable 1992 Accelerator Cable 1991 Accelerator Cable 1990 Accelerator Cable 1989 Accelerator Cable 1988 Accelerator Cable 1987 Accelerator Cable 1986 Accelerator Cable 1985 Accelerator Cable