Scion 90981-13081 Bulb, Fog Lamp

When installing the new bulb, make sure that the three lugs on the mounting base of the bulb socket are aligned with their corresponding cutouts in the headlight housing. Then, insert the bulb socket into the housing and turn it clockwise until it stops.

Remove the instrument cluster and rotate the bulb counterclockwise to remove it.

To disconnect the electrical connector from either headlight bulb holder, you need to depress the release tab and pull off the connector.

Depress the release tab and pull off the connector.

Carefully pry out the interior light housing from the trim panel.

Open the hood. If you're replacing the right-side headlight, remove the windshield washer reservoir for access to the bulb. If you're removing the left-side headlight, remove the cover from the fuse/relay box for access to the bulb. If that doesn't give you enough working room, you can unbolt the fuse/relay box for more access. Otherwise, the headlight housing will have to be removed. Reach behind the headlight assembly and unplug the electrical connector by depressing the clip on the harness connector.

Disconnect the wiring plug from the bulbholder.

Always ensure that the new bulb is of the correct rating and that it is completely clean before fitting it, especially for headlight/foglight bulbs.