Toyota 48068-35081 Front Suspension Control Arm Sub-Assembly Lower Right

Raise the rear of the vehicle and support it securely on jackstands, while blocking the front wheels to prevent rolling. Support the rear axle with a floor jack and detach the ABS harnesses from the upper suspension arms. To remove an upper control arm, take off the nut, washer, and bolt that attach the arm to the frame, as well as the nut, washer, and bolt connecting the arm to the axle. For the lower control arm, remove the nut and bolt that attach it to the frame bracket, along with the nut, washer, and bolt connecting it to the axle bracket. Inspect the control arm bushings for any cracks, tears, or deterioration, and have new ones installed if necessary. Installation follows the reverse order of removal, ensuring all fasteners are tightened to the specified torque values while the vehicle is at normal ride height.

Disconnect any brake hose brackets from the upper control arm. If the vehicle is equipped with ABS, detach the speed sensor harness from the upper arm.

YES, THAT LOWER CONTROL ARM DOES COME WITH THE BUSHINGS.