Toyota 53802-0R050 Fender Sub-Assembly, Front

The remaining steps for the removal of the fender should be followed in sequence of the photos: - Fenderwell splash shield fastener locations (rear fenderwell splash shield similar) - Remove the fender end cap screws - Disengage the square clips with a screwdriver to remove the cap at the inner end - Remove the pushpin clip - Disengage the 3 clips inside the fenderwell with needle-nose pliers - Lift up and remove the plastic upper fender cover - Remove the fender upper bolts - Pry out the plastic fender guard enough to remove the lower fender bolt - Open the front door and remove the exposed bolt - With the door still open, disengage the clips for the inner plastic shield (1 of 3 shown) - Guide the shield out from the fenderwell and remove the exposed inner fenderwell bolt - Remove the fender end bolts - Pry off the small panel with a plastic trim tool, remove the bolt, and carefully guide the fender off the vehicle.