Toyota 23217-16042 Fuel Filter Pump

You can Select Your Vehicle to check if 23217-16042 fits your vehicle.

Before detaching any part of the fuel system, be sure to relieve the fuel line and tank pressure by removing the fuel tank cap and disconnecting the battery. Cover the fitting being disconnected with a rag to absorb any fuel that may spray out. Caution: If the stereo in your vehicle is equipped with an anti-theft system, look at the information on page 0-15 at the front before detaching the cable. Remove the air cleaner assembly and evaporative canister. Using a backup wrench to steady the filter, remove the threaded banjo bolt at the top and loosen the fitting at the bottom of the fuel filter. Use a flare nut wrench if possible. Remove both bracket bolts from the firewall and remove the old filter and the filter support bracket assembly. Note that the inlet and outlet pipes are clearly labeled on their respective ends of the filter and that the flanged end of the filter faces down. Make sure the new filter is installed so that it is facing the proper direction as noted above. When correctly installed, the filter should be installed so that the outlet pipe faces up and the inlet pipe faces down. Using the new crush washers provided by the filter manufacturer, install the inlet and outlet banjo fittings and tighten them securely. The remainder of the installation is the reverse of the removal procedure.