How to remove, install, and adjust the Hood for the 1986 Toyota MR2?

To disarm the HOOD well, use a pencil or paint to draw alignment marks on the upper flange of the hinge then dismantle the mounting bolts of hinge to hood then lastly take off the hood. As for the installation, place the hood and level it according to the marks made before, and fasten and tighten the upper hinge to hood mounting bolts. For adjustment, slacken the side hinge bolts in order to move the hood either forward or backward and in either direction as desired. Movement of the rear edge up or down is controlled by turning of the cushions and the front edge movement can be controlled by adding or removing the number of shims to the hinge-to-body mounting bolts.

Genuine 1986 Toyota MR2 Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hoods found

View related parts
1986 Toyota MR2 Hood Sub-Assembly
Part Number: 53301-17030
Product Specifications
- Other Name: Hood Sub-Assy; Hood
- Replaces: 53301-17031
- Part Name Code: 53301
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53301-17030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 1986 Toyota MR2 Submodels:
- GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA
View related parts
1986 Toyota MR2 Hood Sub-Assembly
Part Number: 53301-17031
Product Specifications
- Other Name: Hood Sub-Assy
- Replaced by: 53301-17030
- Part Name Code: 53301
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53301-17031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 1986 Toyota MR2 Submodels:
- GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA

1986 Toyota MR2 Hood

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 1986 Toyota MR2 Hood, all priced competitively. Feel secure in your purchase, as all our OEM 1986 Toyota MR2 Hood are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

1986 Toyota MR2 Parts Questions & Experts Answers

Q: How to remove, install, and adjust the Hood for the 1986 Toyota MR2?
A: To disarm the HOOD well, use a pencil or paint to draw alignment marks on the upper flange of the hinge then dismantle the mounting bolts of hinge to hood then lastly take off the hood. As for the installation, place the hood and level it according to the marks made before, and fasten and tighten the upper hinge to hood mounting bolts. For adjustment, slacken the side hinge bolts in order to move the hood either forward or backward and in either direction as desired. Movement of the rear edge up or down is controlled by turning of the cushions and the front edge movement can be controlled by adding or removing the number of shims to the hinge-to-body mounting bolts.