How to remove and install a starter motor and solenoid assembly for the 1986 Toyota MR2?

Disconnect the cable from the negative terminal of the battery, then remove the nut and disconnect the battery cable from the solenoid while unplugging the connector from the starter motor. Next, remove the two starter motor mounting bolts and disconnect the exhaust pipe from the exhaust manifold. After that, remove the starter motor/solenoid assembly through the space between the undercover and the engine. Installation is the reverse of removal, ensuring that the starter motor mounting bolts are tightened to the specified torque.

Genuine 1986 Toyota MR2 Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Starter Motor found

View related parts
1986 Toyota MR2 Starter Assembly
Part Number: 28100-15150
Product Specifications
- Other Name: Starter Assy
- Replaced by: 28100-15150-84
- Part Name Code: 28100
- Item Weight: 11.90 Pounds
- Item Dimensions: 13.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 28100-15150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 1986 Toyota MR2 Submodels:
- GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA

1986 Toyota MR2 Starter Motor

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 1986 Toyota MR2 Starter Motor, all priced competitively. Feel secure in your purchase, as all our OEM 1986 Toyota MR2 Starter Motor are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

1986 Toyota MR2 Starter Motor Parts Questions & Experts Answers

Q: How to remove and install a starter motor and solenoid assembly for the 1986 Toyota MR2?
A: Disconnect the cable from the negative terminal of the battery, then remove the nut and disconnect the battery cable from the solenoid while unplugging the connector from the starter motor. Next, remove the two starter motor mounting bolts and disconnect the exhaust pipe from the exhaust manifold. After that, remove the starter motor/solenoid assembly through the space between the undercover and the engine. Installation is the reverse of removal, ensuring that the starter motor mounting bolts are tightened to the specified torque.