How should engine mounts be checked and replaced for the 1992 Toyota Land Cruiser?

Engine mounts are long lasting items and very rarely cause any reliability issues, however if a mount is broken or perished it should be replaced before it causes damage to the driveline. To check the mounts, lift the engine upward a little off the mounts to take the weight off them. First, securely lift the car off the ground with jack stands and place a jack under the oil pan with a large piece of wood between the jack head and oil pan, lifting the engine only slightly to free up the weight on the rubber engine mounts. As to the mounts, check for cracks, hardened rubber, or where the rubber has delaminated from the metal plates; it is also supply to split down the center. Make sure that any of the mount plates has shifted in relation to the engine or frame by using a large screwdriver or a pry bar; if it has shifted lower the engine and then tighten the mount fasteners. To conform a slow process of deteriorating, the mounts are treated by rubber preservative. For replacement, turn off the vehicle and disconnect the negative battery cable with the car well-supported on jackstands. Pop off the nut on the through bolt and the second bolt and nut that joins the mount to the frame bracket. Lift the engine up a little by a jack or hoist to that the fan cannot touch the radiator or shroud, then take out the through bolt and nut to pull out the mount. Removal is done in reverse order or installation, and the thread locking compound must be applied on the mount bolts and must be tightened.

Genuine 1992 Toyota Land Cruiser Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
1992 Toyota Land Cruiser Rear Engine Mounting Insulator
Part Number: 12371-66030
$133.02 MSRP: $189.11
You Save: $56.09 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Engine Mounting, Rear NO.1; Rear Mount
- Position: Rear
- Part Name Code: 12371
- Item Weight: 4.00 Pounds
- Item Dimensions: 15.9 x 12.3 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12371-66030
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Front Engine Mounting Insulator
Part Number: 12361-66030
$95.57 MSRP: $134.72
You Save: $39.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Engine Mounting, Front; Front Mount, Insulator
- Position: Front
- Part Name Code: 12361
- Item Weight: 2.90 Pounds
- Item Dimensions: 7.5 x 6.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12361-66030
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Front Engine Mounting Insulator
Part Number: 12361-61050
$103.24 MSRP: $145.53
You Save: $42.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Engine Mounting, Front; Front Mount, Insulator
- Position: Front
- Part Name Code: 12361
- Item Weight: 2.90 Pounds
- Item Dimensions: 7.0 x 5.9 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12361-61050
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Rear Engine Mounting Insulator
Part Number: 12371-61060
$134.30 MSRP: $190.94
You Save: $56.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Engine Mounting, Rear NO.1
- Position: Rear
- Replaced by: 12371-58060
- Part Name Code: 12371
- Item Weight: 3.80 Pounds
- Item Dimensions: 16.2 x 12.4 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12371-61060
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Engine Mounting Insulator
Part Number: 12362-61010
$110.32 MSRP: $155.51
You Save: $45.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Engine Mounting, RH(For Transverse Engine); Insulator
- Comment: (FOR TRANSVERSE ENGINE)
- Position: Passenger Side
- Part Name Code: 12362
- Item Weight: 2.70 Pounds
- Item Dimensions: 7.6 x 6.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12362-61010
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Front Engine Mounting Bracket Right Hand
Part Number: 12311-66030
$141.56 MSRP: $201.24
You Save: $59.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting, Front NO.1 RH; Front Mount Bracket
- Position: Passenger Side
- Part Name Code: 12311
- Item Weight: 3.00 Pounds
- Item Dimensions: 7.3 x 6.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12311-66030
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Front Engine Mounting Bracket Left Hand
Part Number: 12315-66030
$145.65 MSRP: $207.08
You Save: $61.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting, Front NO.1 LH
- Position: Driver Side
- Replaced by: 12315-66031
- Part Name Code: 12315
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.6 x 6.3 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12315-66030
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
1992 Toyota Land Cruiser Bracket, Engine Mounting, Front RH
Part Number: 12311-61090
Product Specifications
- Other Name: Bracket, Engine Mounting, Front NO.1 RH; Front Bracket
- Position: Passenger Side
- Part Name Code: 12311
- Item Weight: 3.00 Pounds
- Item Dimensions: 7.3 x 6.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12311-61090
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 1992 Toyota Land Cruiser Submodels:
- 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA

1992 Toyota Land Cruiser Engine Mount

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 1992 Toyota Land Cruiser Engine Mount, all priced competitively. Feel secure in your purchase, as all our OEM 1992 Toyota Land Cruiser Engine Mount are covered by warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

1992 Toyota Land Cruiser Engine Mount Parts Questions & Experts Answers

Q:
How should engine mounts be checked and replaced for the 1992 Toyota Land Cruiser?
Posted by Saulius L.
A:
Engine mounts are long lasting items and very rarely cause any reliability issues, however if a mount is broken or perished it should be replaced before it causes damage to the driveline. To check the mounts, lift the engine upward a little off the mounts to take the weight off them. First, securely lift the car off the ground with jack stands and place a jack under the oil pan with a large piece of wood between the jack head and oil pan, lifting the engine only slightly to free up the weight on the rubber engine mounts. As to the mounts, check for cracks, hardened rubber, or where the rubber has delaminated from the metal plates; it is also supply to split down the center. Make sure that any of the mount plates has shifted in relation to the engine or frame by using a large screwdriver or a pry bar; if it has shifted lower the engine and then tighten the mount fasteners. To conform a slow process of deteriorating, the mounts are treated by rubber preservative. For replacement, turn off the vehicle and disconnect the negative battery cable with the car well-supported on jackstands. Pop off the nut on the through bolt and the second bolt and nut that joins the mount to the frame bracket. Lift the engine up a little by a jack or hoist to that the fan cannot touch the radiator or shroud, then take out the through bolt and nut to pull out the mount. Removal is done in reverse order or installation, and the thread locking compound must be applied on the mount bolts and must be tightened.
Answered by Toyota Parts Specialist Bruce / Jan 24, 2024

Related 1992 Toyota Land Cruiser Parts

Alternate Year Models

1991 Toyota Land Cruiser Engine Mount 1993 Toyota Land Cruiser Engine Mount