My Garage
My Account
Cart
Genuine 2001 Toyota Solara Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Shock Absorbers found
2001 Toyota Solara Shock Absorber Assembly Front Left
Part Number: 48520-A9070$118.63 MSRP: $168.65You Save: $50.02 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Absorber Assy, Shock, Front Lh
- Manufacturer Note: MARK 48520-AA030
- Position: Front Driver Side
- Replaced by: 48520-39605
- Part Name Code: 48520
- Item Weight: 9.90 Pounds
- Item Dimensions: 26.4 x 8.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-A9070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota Solara Shock Absorber Assembly Front Right
Part Number: 48510-A9090$136.64 MSRP: $194.26You Save: $57.62 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Absorber Assy, Shock, Front Rh
- Manufacturer Note: MARK 48510-AA030
- Position: Front Passenger Side
- Replaced by: 48510-80137
- Part Name Code: 48510
- Item Weight: 9.60 Pounds
- Item Dimensions: 27.1 x 8.4 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota Solara Shock Absorber Assembly Rear Right
Part Number: 48530-A9050$152.32 MSRP: $216.55You Save: $64.23 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: ABSORBER Assembly, Shock, Rear RH
- Manufacturer Note: MARK 48530-AA030
- Position: Rear Passenger Side
- Replaced by: 48530-80142
- Part Name Code: 48530
- Item Weight: 6.70 Pounds
- Item Dimensions: 26.9 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-A9050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota Solara Shock Absorber Assembly Rear Left
Part Number: 48540-A9050$152.32 MSRP: $216.55You Save: $64.23 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: ABSORBER Assembly, Shock, Rear LH
- Manufacturer Note: MARK 48540-AA030
- Position: Rear Driver Side
- Replaced by: 48540-39565
- Part Name Code: 48540
- Item Weight: 6.90 Pounds
- Item Dimensions: 25.6 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-A9050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota Solara Shock Absorber
With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2001 Toyota Solara Shock Absorber, all priced competitively. Feel secure in your purchase, as all our OEM 2001 Toyota Solara Shock Absorber are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.
2001 Toyota Solara Shock Absorber Parts Questions & Experts Answers
- Q: How to Remove and Install a Front Shock Absorber for the 2001 Toyota Solara?A: Loosen the wheel lug nuts, raise the vehicle and support it securely on jackstands. Remove the wheel. Support the control arm with a floor jack. Remove the brake hose bracket from the strut. If the vehicle is equipped with ABS, detach the speed sensor wiring harness from the strut by removing the clamp bracket bolt. On models equipped with electronic modulated suspension, remove the shock absorber cap and disconnect the shock absorber wiring harness. If the strut is to be disassembled, loosen, but do not remove, the damper shaft nut. Remove the strut-to-knuckle nuts and knock the bolts out with a hammer and punch. Separate the strut from the steering knuckle. Be careful not to overextend the inner CV joint. Also, don't let the steering knuckle fall outward, as the brake hose could be damaged. Support the strut and spring assembly with one hand and remove the three strut-to-shock tower nuts. On models equipped with electronic modulated suspension, loosen but do not remove, the nut in the center of the strut. Remove the assembly out from the fenderwell. Check the strut body for leaking fluid, dents, cracks and other obvious damage which would warrant repair or replacement. Check the coil spring for chips or cracks in the spring coating. Inspect the spring seat for cuts, hardness and general deterioration. If any undesirable conditions exist, proceed to the strut disassembly procedure. Guide the strut assembly up into the fenderwell and insert the three upper mounting studs through the holes in the shock tower. Once the three studs protrude from the shock tower, install the nuts so the strut won't fall back through. Slide the steering knuckle into the strut flange and insert the two bolts. Install the nuts and tighten them to the torque. Reattach the brake hose bracket to the strut. If the vehicle is equipped with ABS, install the speed sensor wiring harness bracket. Install the wheel and lug nuts, then lower the vehicle and tighten the lug nuts to the torque. Tighten the three upper mounting nuts to the torque. If you're working on a model equipped with electronic modulated suspension and the strut had been disassembled, tighten the nut in the center of the strut to the torque. Connect the electrical connector and install cap.
Related 2001 Toyota Solara Parts
2001 Toyota Solara Tie Rod End
2001 Toyota Solara Coil Springs
2001 Toyota Solara Steering Knuckle
2001 Toyota Solara Fender
2001 Toyota Solara Wheelhouse