Toyota 48540-A9050 Shock Absorber Assembly Rear Left

The final steps for this procedure are as follows: Reattach the brake hose bracket to the strut. If the vehicle is equipped with ABS, install the speed sensor wiring harness bracket. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the specified torque. Tighten the three upper mounting nuts to the torque. For models with electronic modulated suspension and disassembled struts, tighten the nut in the center of the strut to the torque. Connect the electrical connector and install the cap.

Guide the strut assembly up into the fender well and insert the three upper mounting studs through the holes in the shock tower. Install the nuts to prevent the strut from falling back through.