To remove the outside mirrors, start by taking off the door trim panel, then disconnect the electrical connector from the mirror. After that, remove the mirror retaining bolts and detach the mirror from the vehicle. For installation, reverse the removal steps. For the inside mirror, first disconnect the electrical connector if present and remove the plastic cover. A hairpin-type spring holds the mirror stalk in the base; push the tab on the base to release the spring and pull towards the roof line to detach the mirror. To install, reinsert the spring if it was removed, then insert the mirror stalk's lug into the mount, pushing downward until it is secured. If the mount plate has come off the windshield, adhesive kits are available at auto parts stores to resecure it, and the included instructions should be followed.