My Garage
My Account
Cart
Genuine Toyota Matrix Turn Signal Flasher
Turn Signal Indicator Flasher- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Turn Signal Flashers found
Toyota Matrix Turn Signal Flasher Assembly
Part Number: 81980-02030$58.89 MSRP: $82.32You Save: $23.43 (29%)Ships in 1-3 Business Days
Toyota Matrix Turn Signal Flasher Assembly
Part Number: 81980-02050$73.27 MSRP: $103.28You Save: $30.01 (30%)Ships in 1-3 Business Days
Toyota Matrix Turn Signal Flasher
The Turn Signal Flasher signals to other motorists that they are planning to turn or warning of trouble. The Toyota Matrix Turn Signal Flasher blinks the corner lamps in succession. In the fuse box is a Turn Signal Flasher that gets current when the stalk is moved, then cycles that current on and off to create the blink. The early Matrix generations relied on a thermal Turn Signal Flasher that heated a spring-steel strip, with the heating of the strip allowing it to flex to close and open the circuit for pulsing the lights and producing the click. Toyota hatchbacks later applied a solid-state Turn Signal Flasher due to the advancement in lighting technology. This electronic relay uses transistors and a timing chip, rather than heat, allowing steady use with low-draw LED bulbs. While both of these styles accomplish the same task of safety, the electronic unit responds faster, runs cooler, and takes on more lamp load without affecting the flash rate. On the other hand, the thermal unit reacts to bulb current. Thus, it can misbehave if a lamp burns out. A healthy Turn Signal Flasher is an important part that will ensure your Toyota Matrix, regardless of its design, signals unmistakably in traffic.
If you are in demand for superior quality and affordable OEM Toyota Matrix Turn Signal Flasher, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Turn Signal Flasher. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Matrix Turn Signal Flasher Parts Questions & Experts Answers
- Q: What is the Function and Troubleshooting Process for the Turn Signal Flasher on a Toyota Matrix?A:The turn signal and hazard flasher is combined and situated at the interior Fuse/relay box category of the Cherokee. During its smooth working, there is a click sound produced at the time of operation of the device. If for instance the turn signals fail on one side while the flasher unit does not click, or if in one side the bulb is flashing faster that usual but on the same side the bulb does not light, then that could mean that there is probably a faulty turn signal bulb. If neither of the turn signals blinks the problem could be a bad flasher unit, a bad turn signal switch, bad turn signal switch, or the flasher is not getting power. Turn signal fuse blown is very easy to diagnose by checking at the fuse box; however before installing a new turn signal fuse, the wiring should be checked for a short. Changing the flasher involves disconnecting the electrical connector and removing the unit from the electrical center; then, the replacement unit has to be an exact match for the old one: before installing the replacement, detailed comparison of the new and the old units is to be conducted; the replacement process is done in the reverse to the removal process.
