To remove the radio, first alternatively, unplug the cable from the negative terminal of the battery. Then, pull the instrument cluster finish center panel down and turn it counterclockwise and unlock it.Total, there are four radio mounting screws, and two of them are on the left of the radio After that, take the radio out of the dash. Remove the radio antenna cable from the back of the radio, then you unplugging all electrical connectors with the radio. For the speakers, usually there is a speaker panel, take a screw driver to take this off carefully, next is the four screws of the speaker, take out the speaker, plug the connector off and remove the speaker. Removal procedure is the exact opposite of an installation, especially when it comes to the radio and speakers.