How to Remove and Install a Tie Rod End on a Toyota Prius?

Before pulling the tie-rod end, it is necessary to unscrew the wheel lug nuts, lift the front end of the car, securely jack up the car using jack stands, and block the rear wheels as well as engage the Parking lock before a removal of the front wheel. Next, remove the cotter pin or clip and slacken the nut on the tie-rod end stud while swinging the tie rod away from the brake. Put on locking pliers or a wrench to keep your tie-rod firmly in place while turning the center of the thread of the jam nut enough to be able to align a '0' mark on the rod to the untwisted end of the threads on the tie-rod end. Lose the nut using a wrench, then separate the tie-rod from the steering knuckle arm by applying a puller to the component to prevent damage. Loose the nut on the tie-rod and remove the tie-rod end from it. For installation, run the tie-rod end though the marked position and place the tie-rod stud through the steering knuckle arm then tighten the jam nut. Place the castle nut with the right-threaded-end on the stud, and so tighten it; add a fresh cotter pin, making sure the hole in it lines up with one of the slots in the nut. Last of it, fit the wheel and the lug nuts, raise the vehicle, torque the lug nuts, and check the alignment and adjust if required.

Genuine Toyota Prius Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Tie Rod Ends found

View related parts
Toyota Prius Right Tie Rod End Sub-Assembly
Part Number: 45046-49255
$57.11 MSRP: $79.83
You Save: $22.72 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End Set, Tie Rod, No ; End Sub-Assembly, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2022 Toyota Prius | 4 Cyl 1.8L | 2ZRFXE; ZVW50L-AHXEBA, ZVW51L-AHXBBA, ZVW51L-AHXEBA, ZVW51L-AHXGBA, ZVW51L-AHXHBA, ZVW55L-AHXEBA, ZVW55L-AHXGBA
View related parts
Toyota Prius End Set,Tie Rod
Part Number: 45047-49165
$55.80 MSRP: $77.99
You Save: $22.19 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: End Set, Tie Rod, No. ; End Sub-Assembly, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2015 Toyota Prius | E, G, L, S | 4 Cyl 1.8L | 2ZRFXE; ZVW30L-AHXBBA, ZVW30L-AHXEBA, ZVW30L-AHXEBK, ZVW30L-AHXGBA, ZVW35L-BHXBBA, ZVW35L-BHXEBA, ZVW35L-BHXEBK, ZVW35L-BHXGBA
View related parts
Toyota Prius Outer Tie Rod
Part Number: 45046-49225
$59.11 MSRP: $83.32
You Save: $24.21 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2015 Toyota Prius | E, G, L, S | 4 Cyl 1.8L | 2ZRFXE; ZVW30L-AHXBBA, ZVW30L-AHXEBA, ZVW30L-AHXEBK, ZVW30L-AHXGBA, ZVW35L-BHXBBA, ZVW35L-BHXEBA, ZVW35L-BHXEBK, ZVW35L-BHXGBA
View related parts
Toyota Prius Tie Rod End Sub-Assembly , Left
Part Number: 45047-49195
$55.68 MSRP: $77.83
You Save: $22.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Set, Tie Rod, No ; End Sub-Assembly, Tie Rod, Lh; Outer Tie Rod
- Manufacturer Note: MOON ROOF-WITH
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2022 Toyota Prius | 4 Cyl 1.8L | 2ZRFXE; ZVW50L-AHXEBA, ZVW51L-AHXBBA, ZVW51L-AHXEBA, ZVW51L-AHXGBA, ZVW51L-AHXHBA, ZVW55L-AHXEBA, ZVW55L-AHXGBA
View related parts
Toyota Prius Right Tie Rod End Sub-Assembly
Part Number: 45046-49145
$73.38 MSRP: $103.44
You Save: $30.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2009 Toyota Prius | 4 Cyl 1.5L | 1NZFXE; NHW20L-AHEEBA, NHW20L-AHEEBK
View related parts
Toyota Prius Left Tie Rod End Sub-Assembly
Part Number: 45047-49075
$73.38 MSRP: $103.44
You Save: $30.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2009 Toyota Prius | 4 Cyl 1.5L | 1NZFXE; NHW20L-AHEEBA, NHW20L-AHEEBK
View related parts
Toyota Prius Left Tie Rod End Sub-Assembly
Part Number: 45047-49045
$65.83 MSRP: $92.80
You Save: $26.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Lh; Outer Tie Rod
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Prius | 4 Cyl 1.5L | 1NZFXE; NHW11L-AEEEBA, NHW11L-AEEEBK
View related parts
Toyota Prius Right Tie Rod End Sub-Assembly
Part Number: 45046-49115
$65.83 MSRP: $92.80
You Save: $26.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: End Sub-Assy, Tie Rod, Rh; Outer Tie Rod
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Prius | 4 Cyl 1.5L | 1NZFXE; NHW11L-AEEEBA, NHW11L-AEEEBK
View related parts
Toyota Prius Outer Tie Rod
Part Number: 45046-79035
$78.93 MSRP: $111.26
You Save: $32.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: END SUB-ASSY, TIE RO; Outer Tie Rod
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Prius | 4 Cyl 2.0L | M20AFXS; MXWH60L-AHXEBA, MXWH60L-AHXGBA, MXWH60L-AHXHBA, MXWH61L-AHXEBA, MXWH61L-AHXGBA, MXWH61L-AHXHBA, MXWH65L-AHXEBA, MXWH65L-AHXGBA, MXWH65L-AHXHBA

Toyota Prius Tie Rod End

The Tie Rod End of a Toyota Prius is a connector between the steering rack and the steering knuckle, which transmits steering input so that the front wheels turn smoothly and stay aligned. The two ends of the rack gear are the position of this part, which controls the steering and stability of the vehicle. The inner Tie Rod End connects to the rack, while the outer Tie Rod End attaches to the steering knuckle. Together, they make up the sole linkage in the rack and pinion layout applied by the Toyota Prius steering system. The force applied from the steering wheel is transferred via a column to the rack, after which it travels through the Toyota Prius inner Tie Rod End and outer Tie Rod End pair. This enables movement of the wheels with the least amount of effort. If a single Tie Rod End is worn, the customer will likely comment on a loose feel or poor steering return. A properly functioning component helps maintain even tire wear on the Toyota Prius, and it also provides the expected feel.

If you are in demand for superior quality and affordable OEM Toyota Prius Tie Rod End, then shop with us! We own a wide range of the reduced-priced genuine Toyota Prius Tie Rod End. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Prius Tie Rod End Parts Questions & Experts Answers

Right Tie Rod End Sub-Assembly
45046-49145
Q: How to Remove and Install a Tie Rod End on a Toyota Prius?
A:
Before pulling the tie-rod end, it is necessary to unscrew the wheel lug nuts, lift the front end of the car, securely jack up the car using jack stands, and block the rear wheels as well as engage the Parking lock before a removal of the front wheel. Next, remove the cotter pin or clip and slacken the nut on the tie-rod end stud while swinging the tie rod away from the brake. Put on locking pliers or a wrench to keep your tie-rod firmly in place while turning the center of the thread of the jam nut enough to be able to align a '0' mark on the rod to the untwisted end of the threads on the tie-rod end. Lose the nut using a wrench, then separate the tie-rod from the steering knuckle arm by applying a puller to the component to prevent damage. Loose the nut on the tie-rod and remove the tie-rod end from it. For installation, run the tie-rod end though the marked position and place the tie-rod stud through the steering knuckle arm then tighten the jam nut. Place the castle nut with the right-threaded-end on the stud, and so tighten it; add a fresh cotter pin, making sure the hole in it lines up with one of the slots in the nut. Last of it, fit the wheel and the lug nuts, raise the vehicle, torque the lug nuts, and check the alignment and adjust if required.