How to remove the fuel pump or fuel gauge sending unit on certain engines?

To remove the fuel pump, relieve the fuel pressure, remove the fuel tank, disconnect the electrical connector, and remove the fuel supply and return line fittings. For the Fuel Level Sensor, the electrical connector is disconnected, and the lock tab is released. For the fuel pump, the Fuel Level Sensor is removed, and the electrical connector is disconnected. The suction filter hose and plastic tubes are detached, and the fuel suction plate is separated. The fuel suction filter is removed from the fuel pump, and the fuel pump harness electrical connector is disconnected. For installation, the Fuel Pressure Regulator is pushed into the housing with new O-rings, the spacer and new O-ring are installed on the pump, and the electrical connector is connected. The fuel pump is then slid into the assembly, aligning it with the outlet, and the fuel suction filter is engaged. The remaining steps are the reverse of removal.

Genuine Toyota Sequoia Fuel Level Sensor

Gas Gauge Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

8 Fuel Level Sensors found

View related parts
Toyota Sequoia Gage Assembly, Fuel Send
Part Number: 83320-0C080
- Other Name: Gage Assy, Fuel Sender; Fuel Gauge Sending Unit, Fuel Sender Unit
- Replaces: 83320-0C022, 83320-0C023
$92.70 MSRP: $130.67
You Save: $37.97 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFE; 1URFE, 2UZFE, 3URFE; UCK60L-GKALKA, 3URFE; UPK60L-GKTLKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLKA, USK65L-GKTSKA, USK65L-GKTZKA
Less Info
View related parts
Toyota Sequoia Gage Assy, Fuel Sender
Part Number: 83320-34040
- Replaced by: 83320-34041
$115.43 MSRP: $162.71
You Save: $47.28 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
Less Info
View related parts
Toyota Sequoia Gage Assembly, Fuel Send
Part Number: 83320-0C040
- Other Name: Gage Assy, Fuel Sender; Fuel Gauge Sending Unit, Fuel Sender Unit
$92.39 MSRP: $130.24
You Save: $37.85 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2011-2018 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE; 3URFBE; USK65L-GKTLGA, USK65L-GKTSGA, USK65L-GKTZGA
Less Info
View related parts
Toyota Sequoia Gage Assembly, Fuel Send
Part Number: 83320-0C023
- Other Name: Gage Assy, Fuel Sender
- Replaced by: 83320-0C080
$92.70 MSRP: $130.67
You Save: $37.97 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2012 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFE; 1URFE, 2UZFE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLKA, USK65L-GKTSKA, USK65L-GKTZKA
Less Info
View related parts
Toyota Sequoia Gage Assy, Fuel Sender
Part Number: 83320-0C011
- Other Name: Fuel Gauge Sending Unit, Fuel Sender Unit
- Replaces: 83320-0C010
$91.18 MSRP: $128.52
You Save: $37.34 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
Less Info
View related parts
Toyota Sequoia Gage Assembly, Fuel Send
Part Number: 83320-0C030
- Other Name: Gage Assy, Fuel Sender; Fuel Gauge Sending Unit, Fuel Sender Unit
$149.43 MSRP: $212.45
You Save: $63.02 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2012 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE; 3URFBE; USK65L-GKTLGA, USK65L-GKTSGA, USK65L-GKTZGA
Less Info
View related parts
Toyota Sequoia Gage Assy, Fuel Sender
Part Number: 83320-0C022
- Replaced by: 83320-0C080
$92.70 MSRP: $130.67
You Save: $37.97 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2009 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.7L, 8 Cyl 5.7L | 2UZFE, 3URFE; 2UZFE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLKA, USK65L-GKTSKA, USK65L-GKTZKA
Less Info
View related parts
Toyota Sequoia Gage Assy, Fuel Sender
Part Number: 83320-0C010
- Replaced by: 83320-0C011
$91.18 MSRP: $128.52
You Save: $37.34 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2004-2006 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
Less Info

Toyota Sequoia Fuel Level Sensor Parts Questions & Answers

Gage Assembly, Fuel Send
83320-0C040
Q: How to remove the fuel pump or fuel gauge sending unit on certain engines?
A: To remove the fuel pump, relieve the fuel pressure, remove the Fuel Tank, disconnect the electrical connector, and remove the fuel supply and return line fittings. For the Fuel Level Sensor, the electrical connector is disconnected, and the lock tab is released. For the fuel pump, the Fuel Level Sensor is removed, and the electrical connector is disconnected. The suction filter hose and plastic tubes are detached, and the fuel suction plate is separated. The fuel suction filter is removed from the fuel pump, and the fuel pump harness electrical connector is disconnected. For installation, the Fuel Pressure Regulator is pushed into the housing with new O-rings, the spacer and new O-ring are installed on the pump, and the electrical connector is connected. The fuel pump is then slid into the assembly, aligning it with the outlet, and the fuel suction filter is engaged. The remaining steps are the reverse of removal.