How to install and adjust Hood Cable and Hood Latch for the hood release on Toyota Sienna?

For the latch first, create a line around it on the door skin and remove the bolts that hold it in front of the radiator support for horizontal or vertical movement. Pull the hood cable off the latch assembly by unbending it and take off the latch. For the cable, most companies write to unfasten it from the latch assembly, thread a small wire or string through its end, and then unclasp all the staying securing clips at the radiator support. Raise and secure the front fenderwell, then the outer bolt from the bottom and the inner from the top remove the hood cable from the knee bolster by popping loose the grate then separate the top of the cable from the lever. Subsequently, extract the knee bolster and subsequently retract the cable as well as grommet into the passenger compartment to unveil the wire or string, if any. Check that a grommet is fitted on the new cable and untying the wire or string in the old cable and tie it on the new one. Recover the wire or string through the firewall to the new position of the latch assembly and locate the new cable just as in the previous step, insert the hood lever's new cable into its housing which slides into the notch on the handle bracket. At last, reverse the above order to finish up the installation and push on the grommet from the passengers area to allow it to fit into the firewall accordingly.

Genuine Toyota Sienna Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Hood Cables found

View related parts
Toyota Sienna Hood Lever Sub-Assembly
Part Number: 53601-02040-C0
$47.59 MSRP: $66.52
You Save: $18.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Lever, Release Handle, Release Lever
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; AXLH40L-PNXLHA, AXLH40L-PNXSHA, AXLH40L-PNXXHA, AXLH40L-PPXEHA, AXLH40L-PPXXHA, AXLH45L-PNXLHA, AXLH45L-PNXSHA, AXLH45L-PNXXHA, AXLH45L-PPXEHA
View related parts
Toyota Sienna Hood Lock Control Cable Assembly
Part Number: 53630-AE010
$54.13 MSRP: $75.67
You Save: $21.54 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy, Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Hood Lock Control Cable Assembly
Part Number: 53630-08030
$32.83 MSRP: $45.89
You Save: $13.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy, Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Hood Lock Control Lever Sub-Assembly
Part Number: 53611-AA010-B0
$15.46 MSRP: $21.61
You Save: $6.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Hood Lock Control Lever Sub-Assembly
Part Number: 53601-02020-B2
$48.30 MSRP: $67.52
You Save: $19.22 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Lever, Release Handle
- Manufacturer Note: GRAY,TRIM1#
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Hood Lock Control Lever Sub-Assembly
Part Number: 53611-AA010-E0
$15.46 MSRP: $21.61
You Save: $6.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Release Handle
- Manufacturer Note: FAWN,TRIM4#
- Replaces: 53611-12040-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Hood Lock Control Assembly
Part Number: 53610-08010-B0
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2020 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Hood Lock Control Assembly
Part Number: 53610-08011-B0
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly, Hood L; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFKS; GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SEZDHA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Hood Lever Sub-Assembly
Part Number: 53601-02040-B1
$44.38 MSRP: $62.03
You Save: $17.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Release Handle, Release Lever
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; AXLH40L-PNXLHA, AXLH40L-PNXSHA, AXLH40L-PNXXHA, AXLH40L-PPXEHA, AXLH40L-PPXXHA, AXLH45L-PNXLHA, AXLH45L-PNXSHA, AXLH45L-PNXXHA, AXLH45L-PPXEHA
View related parts
Toyota Sienna Hood Lever Sub-Assembly
Part Number: 53601-02020-E4
$47.11 MSRP: $65.85
You Save: $18.74 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Release Handle
- Manufacturer Note: ASH BROWN,TRIM4#
- Replaces: 53601-52010-E3
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Hood Lock Control Cable Assembly
Part Number: 53630-08031
$32.83 MSRP: $45.89
You Save: $13.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Loc; Release Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFKS; GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SEZDHA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Cable Assembly, Hood Loc
Part Number: 53630-08040
$32.83 MSRP: $45.89
You Save: $13.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2024 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; AXLH40L-PNXLHA, AXLH40L-PNXSHA, AXLH40L-PNXXHA, AXLH40L-PPXEHA, AXLH40L-PPXXHA, AXLH45L-PNXLHA, AXLH45L-PNXSHA, AXLH45L-PNXXHA, AXLH45L-PPXEHA
View related parts
Toyota Sienna Control Assembly, Hood Left
Part Number: 53610-08010-E0
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2020 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Hood Lock Control Assembly
Part Number: 53610-08011-E0
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly, Hood L; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFKS; GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SEZDHA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Release Handle
Part Number: 53610-08010-C0
$38.78 MSRP: $54.21
You Save: $15.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2018 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Hood Lock Control Assembly
Part Number: 53610-08010-C1
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly, Hood L
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFE, 2GRFKS; GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Hood Lock Control Assembly
Part Number: 53610-08011-C1
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly, Hood L; Release Handle
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFKS; GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SEZDHA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Control Assembly, Hood L
Part Number: 53610-08010-B1
$39.97 MSRP: $55.87
You Save: $15.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assy, Hood Lock Control
- Manufacturer Note: GRAY,TRIM1#
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2015 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Hood Lock Control Cable Assembly
Part Number: 53630-08011
$40.92 MSRP: $57.20
You Save: $16.28 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy, Hood Lock Control
- Replaced by: 53630-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2000 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Hood Lock Control Cable Assembly
Part Number: 53630-08020
$40.92 MSRP: $57.20
You Save: $16.28 (29%)
Product Specifications
- Other Name: Cable Assy, Hood Lock Control; Release Cable
- Replaces: 53630-08011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK

| Page 1 of 2 |Next >

1-20 of 21 Results

Toyota Sienna Hood Cable

The Toyota Sienna Hood Cable lets drivers quickly pop the hood safely for easy access to the engine for checking and repairs. From the release handle positioned on the dashboard to the latch assembly located at the nose, the Hood Cable pulls the catch free of the hood with the slight tug of the lever for easy lifting. In many model years, the scheme employs a twin line layout wherein one main Hood Cable stretches to a junction block, while shorter secondary lines travel to each latch. This design spreads strain, such that both sides unlock at the same time. Later Sienna editions in the current Toyota lineup gain the advantage of this upgrade. Some earlier configurations applied a single continuous cable and were therefore more susceptible to stretching and breakage. Thus, the design was changed to split, which improves durability and makes replacing just the worn section easier. Water can leak in through the outer shell of the Hood Cable, corroding the strands and causing the cable to jam or break, leaving the hood stuck. A prompt inspection and replacement of a faulty Hood Cable enables confident, fingertip control. Having spent plenty of time in the engine bay of their Sienna, loyal Toyota owners know how useful a small component can be.

If you are in demand for superior quality and affordable OEM Toyota Sienna Hood Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Hood Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sienna Hood Cable Parts Questions & Experts Answers

Hood Lock Control Cable Assembly
53630-AE010
Q: How to install and adjust Hood Cable and Hood Latch for the hood release on Toyota Sienna?
A:
For the latch first, create a line around it on the door skin and remove the bolts that hold it in front of the radiator support for horizontal or vertical movement. Pull the hood cable off the latch assembly by unbending it and take off the latch. For the cable, most companies write to unfasten it from the latch assembly, thread a small wire or string through its end, and then unclasp all the staying securing clips at the radiator support. Raise and secure the front fenderwell, then the outer bolt from the bottom and the inner from the top remove the hood cable from the knee bolster by popping loose the grate then separate the top of the cable from the lever. Subsequently, extract the knee bolster and subsequently retract the cable as well as grommet into the passenger compartment to unveil the wire or string, if any. Check that a grommet is fitted on the new cable and untying the wire or string in the old cable and tie it on the new one. Recover the wire or string through the firewall to the new position of the latch assembly and locate the new cable just as in the previous step, insert the hood lever's new cable into its housing which slides into the notch on the handle bracket. At last, reverse the above order to finish up the installation and push on the grommet from the passengers area to allow it to fit into the firewall accordingly.