How to replace a power steering pump on a Toyota Sienna?

To replace a power steering pump, start by disconnecting the cable from the negative battery terminal and using a syringe or suction gun to remove as much fluid as possible from the reservoir. Then, loosen the right front wheel lug nuts, raise the vehicle, and remove the wheel and fender apron seal. Next, disconnect the fluid return hose and pressure line from the pump, remove the drive belt, and finally remove the pump itself. To install the new pump, simply reverse these steps, being sure to tighten all bolts to the proper torque specifications and adjust the drive belt tension. Finally, top up the fluid level in the reservoir and bleed the system.

Genuine Toyota Sienna Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Pumps found

View related parts
Toyota Sienna Vane Pump Assembly
Part Number: 44310-08020
$338.39 MSRP: $504.82
You Save: $166.43 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2010 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Vane Pump Assembly
Part Number: 44310-08010
$359.69 MSRP: $536.58
You Save: $176.89 (33%)
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Vane Pump Assembly
Part Number: 44320-07012
$298.68 MSRP: $428.28
You Save: $129.60 (31%)
Product Specifications
- Other Name: Pump Assy, Vane; Power Steering Pump
- Manufacturer Note: (L)
- Replaces: 44320-33110, 44320-33111, 44320-07010, 44320-07011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK

Toyota Sienna Power Steering Pump

The Power Steering Pump of Toyota Sienna is one of the car's vital units that transmute the energy from the engine into hydraulic power that helps the driver to steer. Thus when this hydraulic power is supplied to the steering system, the pump relieves the amount of force required to turn the wheels in an easier way especially for big vehicles. Toyota Sienna Power Steering Pump makes use of hydraulic queue to increase the steering effort, accompanied by gears that form a mechanical link between the steering wheel and the wheels in case of failure of the power assisted system. Though some construction vehicles employ electrical/electronic power helping steering, the Power Steering Pump is essential in Toyota Sienna and its vehicles to assist the driver to steer conveniently.

If you are in demand for superior quality and affordable OEM Toyota Sienna Power Steering Pump, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Power Steering Pump. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sienna Power Steering Pump Parts Questions & Experts Answers

Vane Pump Assembly
44310-08010
Q: How to replace a power steering pump on a Toyota Sienna?
A:
To replace a power steering pump, start by disconnecting the cable from the negative battery terminal and using a syringe or suction gun to remove as much fluid as possible from the reservoir. Then, loosen the right front wheel lug nuts, raise the vehicle, and remove the wheel and fender apron seal. Next, disconnect the fluid return hose and pressure line from the pump, remove the drive belt, and finally remove the pump itself. To install the new pump, simply reverse these steps, being sure to tighten all bolts to the proper torque specifications and adjust the drive belt tension. Finally, top up the fluid level in the reservoir and bleed the system.