My Garage
My Account
Cart
Genuine Toyota Supra Ignition Switch
Starter Ignition Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Ignition Switches found
Toyota Supra Switch Assy, Un-Lock Warning
Part Number: 84052-35020$41.76 MSRP: $58.36You Save: $16.60 (29%)Ships in 1-3 Business Days
Toyota Supra Switch Assy, Un-Lock Warning
Part Number: 84052-16020$32.93 MSRP: $46.03You Save: $13.10 (29%)Ships in 1-3 Business Days
Toyota Supra Switch Assy, Un-Lock Warning
Part Number: 84052-10020$55.67 MSRP: $77.81You Save: $22.14 (29%)Ships in 1-3 Business Days
Toyota Supra Switch Assy, Ignition Or Starter
Part Number: 84450-16080$108.90 MSRP: $153.52You Save: $44.62 (30%)
Toyota Supra Switch Assy, Ignition Or Starter
Part Number: 84450-14070$66.85 MSRP: $94.23You Save: $27.38 (30%)
Toyota Supra Ignition Switch
If you are in demand for superior quality and affordable OEM Toyota Supra Ignition Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Supra Ignition Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Supra Ignition Switch Parts Questions & Experts Answers
- Q: How to check and replace the ignition switch and Ignition Lock Cylinder on Toyota Supra?A:To check the ignition switch and the warning buzzer, first disconnect the cable from the negative terminal of the battery. Locate the large plastic electrical connector next to the turn signal, hazard flasher, and dimmer switch connector at the bottom of the steering column assembly, and remove the steering column cover. Use an ohmmeter to check for continuity between the indicated terminals in the electrical connectors; if the continuity of the ignition switch or buzzer is not as specified, replace the ignition switch. For replacement, disconnect the negative cable from the battery and remove the steering column cover. Detach the bezel along with the illumination bulb holder by removing two screws. Set the key in the ACC position, depress the inset retaining pin on the side of the unit, and pull on the key to withdraw the lock unit. To remove the ignition switch, take out the retaining screws, withdraw the unit from the column, and disconnect the electrical wiring harness from the multi-connector. Installation is the reverse of removal, ensuring that if the ignition switch is slotted, the tab in the bracket aligns with the recess in the ignition switch before installation.
