My Garage
My Account
Cart
Genuine Toyota Tacoma Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
13 Accelerator Cables found
Toyota Tacoma Throttle Cable Assembly
Part Number: 35520-35190$124.94 MSRP: $177.63You Save: $52.69 (30%)Ships in 1 Business Day
Toyota Tacoma Throttle Cable Assembly
Part Number: 35520-35180$121.20 MSRP: $172.31You Save: $51.11 (30%)Ships in 1-2 Business Days
Toyota Tacoma Cable Assy, Accelerator Control
Part Number: 78180-04070$108.90 MSRP: $153.51You Save: $44.61 (30%)Ships in 1-3 Business Days
Toyota Tacoma Throttle Cable Assembly
Part Number: 35520-35230$121.20 MSRP: $172.31You Save: $51.11 (30%)Ships in 1-2 Business Days
Toyota Tacoma Cable Assy, Accelerator Control
Part Number: 78180-35470$109.37 MSRP: $154.17You Save: $44.80 (30%)
Toyota Tacoma Cable Assy, Accelerator Control
Part Number: 78180-04050$101.70 MSRP: $143.37You Save: $41.67 (30%)
Toyota Tacoma Cable Assy, Accelerator Control
Part Number: 78180-04090$108.90 MSRP: $153.51You Save: $44.61 (30%)
Toyota Tacoma Accelerator Cable
The Accelerator Cable in a Toyota Tacoma serves as the direct link that allows you to open and close the throttle plate via the component when you depress the accelerator to create the right air-fuel mixture for motor combustion. The Accelerator Cable inside a Toyota pickup runs from the pedal to the carburetor barrel. When the pedal is pulled, the throttle plate opens in a series of measured steps. This exposes extra passages so that extra air rushes through the venturi. This draws additional fuel from the float bowl, which is then atomized for stronger power. No sooner is the pedal released than the return springs close the plate with their original force, and the Accelerator Cable quickly goes slack, returning the engine to an efficient idling mixture. Early Tacoma trucks that were carbureted applied just this flexible steel Accelerator Cable to pull the throttle. Some other trucks in the same period could instead use a rigid rod style linkage that had the same goal through pivot joints on the carbureted end. The feel and routing is the main difference, with the cable bending around various engine parts while the solid linkage must follow straighter lines. The Accelerator Cable is simple, rugged, and quick to replace even today in every Toyota Tacoma, allowing for crisp throttle response action for work or relaxation.
If you are in demand for superior quality and affordable OEM Toyota Tacoma Accelerator Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Accelerator Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Tacoma Accelerator Cable Parts Questions & Experts Answers
- Q: How to Remove and Install the Accelerator Cable on Toyota Tacoma?A:Detach the cable from the negative terminal of the battery, ensuring you have the correct activation code for the anti-theft system if applicable. Loosen the locknut on the threaded portion of the throttle cable at the Throttle Body. Rotate the throttle lever and slip the throttle cable end out of the slot in the lever. Detach the throttle cable from the accelerator pedal and remove the two bolts securing the cable casing to the firewall. From inside the engine compartment, pull the cable through the firewall. For installation, reverse the removal steps, ensuring the cable casing grommet seats properly in the firewall. To adjust the cable, fully depress the accelerator pedal and check that the throttle is fully opened; if not, loosen the locknuts, depress the accelerator pedal, and adjust the cable until the throttle is fully open. Tighten the locknuts and recheck the adjustment, confirming that the throttle closes fully when the pedal is released.
