How to Remove and Refit the Brake Light Switch on Toyota Yaris?

To remove the brake light switch, start by moving the driver's seat fully to the rear for maximum working space. Disconnect the wiring plug from the brake light switch located at the top of the brake pedal bracket, then loosen the switch locknut and withdraw the switch from the bracket. For refitting, reverse the removal process. After fitting and reconnecting the switch, check its operation by having an assistant observe the brake lights while you push the brake pedal in by hand approximately 5 to 10 mm, adjusting the brake light switch so that the lights just turn off. Release the pedal and slowly press it again to ensure the brake lights illuminate before the pedal has traveled 15 mm. Additionally, the brake light can be adjusted by measuring the clearance between the switch plunger and the top of the pedal, comparing it with the specified measurement.

Genuine Toyota Yaris Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Light Switches found

View related parts
Toyota Yaris Stop Lamp Switch Assembly
Part Number: 84340-69025
$44.38 MSRP: $62.03
You Save: $17.65 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Stop Lamp; Stoplamp Switch
- Manufacturer Note: W(CRUISE CONTROL)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2010 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Stop Lamp Switch Assembly
Part Number: 84340-19025
$16.66 MSRP: $23.29
You Save: $6.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Stop Lamp
- Manufacturer Note: W(CRUISE CONTROL)
- Replaced by: 84340-09310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2016 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; NCP131L-AGMRKA, NCP131L-AGMRKK, NCP131L-AGMVKK, NCP131L-AGPRKA, NCP131L-AGPRKK, NCP131L-AGPVKK, NCP131L-AHMRKA, NCP131L-AHMRKK, NCP131L-AHMVKK, NCP131L-AHPRKA, NCP131L-AHPRKK, NCP131L-AHPVKK, NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Switch Assembly, Stop Lamp
Part Number: 84340-WB002
$19.47 MSRP: $27.22
You Save: $7.75 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Stop La; Stoplamp Switch
- Replaces: 84340-WB001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | Base, Entry, High | P5 | P5; DADW-NAA, DADW-NAB, DADW-NAC, DAEA-NAA, DAEA-NAB, DAEA-NAC, DAEA-NAD, DAEA-NAE, DAEB-NAC, DAEC-NAC, DAEC-NAD, DAEC-NAE, DAEC-NAF, DAED-NAA, DAEE-NAA, DAEE-NAB, DDF4-NAA, DDF4-NAB, DDF4-NAC, DDF4-NAD, DDF5-NAA, DDF5-NAB, DDF5-NAC, DDF5-NAD, DDF5-NAE, DDF5-NAF, DDF5-NAG, DDF8-NAA, DDF9-NAA, DDF9-NAB, DM0S-NAA, DM0S-NAB, DM0S-NAC, DM0T-NAA, DM0T-NAB, DM0T-NAC, DM0T-NAD, DM0T-NAE, DM0V-NAA, DM0W-NAA, DM0W-NAB
View related parts
Toyota Yaris Switch Assembly, Stop Lamp
Part Number: 84340-09020
$39.50 MSRP: $55.21
You Save: $15.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Stop Lamp; Stoplamp Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2018 Toyota Yaris | 4 Cyl 1.5L | 1NZFE; NCP131L-CGMRKA, NCP131L-CGMRKK, NCP131L-CGMSKK, NCP131L-CGPRKA, NCP131L-CGPRKK, NCP131L-CGPSKK, NCP131L-CHMRKA, NCP131L-CHMRKK, NCP131L-CHMSKK, NCP131L-CHPRKA, NCP131L-CHPRKK, NCP131L-CHPSKK

Toyota Yaris Brake Light Switch

The Brake Light Switch of Toyota Yaris is an electrical device that activates the back brake lights when the driver presses the brake pedal. The Brake Light Switch is mounted on a bracket beneath the dash that is in line with the pedal arm. The contacts touch the arm so the movements of the pedal will close the circuit and cause the bulbs to light up. This gives a clear warning to following traffic. When the pedal is released, the contact separates, opening the circuit and switching off the lights. Each Yaris was fitted with a Brake Light Switch as a single-purpose component to ensure the correct operation of the larger lighting system applied in darkness, in heavy traffic, and in inclement weather. The Brake Light Switch is designed to the original equipment specifications for Toyota vehicles, ensuring correct pedal clearance and illumination timing. Its design for Toyota Yaris applications stresses straightforward fitment and reliable function without any added adjustability or other designs. Utilizing strong and resilient materials designed for road use, the Brake Light Switch performs dependably like clockwork, which means you can count on lighting reliability on all Yaris vehicles when braking to keep every Yaris visible on the road.

If you are in demand for superior quality and affordable OEM Toyota Yaris Brake Light Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Yaris Brake Light Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Yaris Brake Light Switch Parts Questions & Experts Answers

Stop Lamp Switch Assembly
84340-69025
Q: How to Remove and Refit the Brake Light Switch on Toyota Yaris?
A:
To remove the brake light switch, start by moving the driver's seat fully to the rear for maximum working space. Disconnect the wiring plug from the brake light switch located at the top of the brake pedal bracket, then loosen the switch locknut and withdraw the switch from the bracket. For refitting, reverse the removal process. After fitting and reconnecting the switch, check its operation by having an assistant observe the brake lights while you push the brake pedal in by hand approximately 5 to 10 mm, adjusting the brake light switch so that the lights just turn off. Release the pedal and slowly press it again to ensure the brake lights illuminate before the pedal has traveled 15 mm. Additionally, the brake light can be adjusted by measuring the clearance between the switch plunger and the top of the pedal, comparing it with the specified measurement.