Toyota 04437-30030 Rear Cv Joint Boot Kit Outboard Joint

You can Select Your Vehicle to check if 04437-30030 fits your vehicle.

Some auto parts stores carry "split" type replacement boots that can be installed without removing the drive axle from the vehicle, but it is recommended to remove the drive axle and clean the CV joint to ensure it is free from contaminants. It is important to periodically inspect the CV joints and boots for cracks, leaks, and broken retaining bands. If lubricant leaks out, the CV joint will wear prematurely and require replacement. When replacing the boots, it is necessary to remove the drive axles and disassemble the CV joints. For 1982 through 1986 models, the outer CV joint boot can be replaced by cutting off the boot retaining band, removing the spring clip, and disassembling the joint. The inner CV joint boot can be replaced by prying off the end plate and removing the snap-ring. For 1987 through 1992 models, the outer and inner boots can be replaced by removing the clamps, separating the joint tulip from the tripod joint, and disassembling the joint. It is important to thoroughly clean the CV joints and inspect them for wear or damage before reassembly. The new boots should be installed with the specified amount of grease and the clamps should be tightened. Finally, the drive axle can be reinstalled.