Toyota 36112-35090 Case, Transfer, Rear

For the do-it-yourselfer, rebuilding of transfer case is a very demanding as it involves dismantling of many parts, which are usually small, with close tolerance in the clearance that may need to be changed with the help of select-fit spacer and snap-ring. Although a competent person can change or replace the transfer case, the overhaul is most efficiently left to a transmission repair shop, as the costs and the time needed are usually higher than with the rebuilt transfer case, which may be purchased through the dealer parts departments and auto parts stores. As for the transfer case reconstruction, an inexperienced mechanic can also manage it with the help of special tools and attentively studying all details and their purpose to prevent missing something important. The tools used may include interior and exterior snap-ring pliers, a bearing puller, a slide hammer, a set of punch tools, dial indicator, hydraulic press possibly and strong working table with vise or transfer case stand. It should also be noted that much attention should ber paid to the documentation of the positions and connections of each of the components, during the disassembly stage, for easy reassembly. Furthermore, the knowledge of the malfunctioning section in the transfer case can make the investigation as well as the replacement of specific components to be less complicated.

After raising the vehicle, you should drain the transfer case lubricant.