Toyota 43510-47011 Front Axle Bearing And Hub Assembly, Left

For the 2001 through 2003 models, to press the hub and bearing off the steering knuckles, one needs special tools and skills, hence should be left in the hands of the mechanic shops. Both, the steering knuckle and the hub can be unbolted and carried to an automotive gearbox or some other centre that is reparable with the required tools. To gain access to the joint for the 2004 and later models, the steering knuckle has to be unbolted first. Next, install the knuckle assembly into a vise with soft clamps and then off the four augmented screws of the hub assembly and lastly the dust plate. The process of installation is the opposite of removal while making sure that all the fasteners are tightened.