Toyota 77001-06111 Tank Assy, Fuel

Relieve the fuel system pressure. Remove the fuel filler cap to relieve fuel tank pressure. Detach the cable from the negative terminal of the battery. If the tank is full or nearly full, siphon the fuel into an approved container using a siphoning kit. Warning: Do not start the siphoning action by mouth! Raise the vehicle and securely place it on jackstands. Completely remove the exhaust system from the center exhaust pipe to the rear of the vehicle. Disconnect the fuel lines, vapor return line, and fuel inlet pipe from the fuel tank fittings. Be sure to plug the hoses to prevent leakage and contamination of the fuel system. Remove the four fasteners securing the exhaust heat shield below the fuel tank. Support the fuel tank with a floor jack. Place a sturdy plank between the jack head and the fuel tank to protect the tank. Remove the bolts from the fuel tank retaining straps. Remove the tank from the vehicle. Installation is the reverse of removal.

To reinstall, reverse the previous steps, ensuring all components are properly connected and secured.

They can ignite during tank repair.

To reinstall, reverse the previous steps, ensuring all components are properly connected and secured.

Extra caution should be taken as it could cause an explosion.

Remove the fuel filler cap to relieve fuel tank pressure.