How to remove and install the oil pan in V6 engine for the 2008 Toyota Tundra?

On 4WD models, it will be necessary to either remove the front axle/differential assembly or remove the engine from the vehicle in order to remove the oil pan. Begin by disconnecting the cable from the negative terminal of the battery. Raise the front of the vehicle and place it securely on jackstands. Drain the engine oil and remove the splash shield from underneath the engine. Remove the bolts and nuts that secure oil pan No. 2 (the smaller stamped steel pan) to the larger cast aluminum oil pan, which may be stuck due to RTV sealant; tap it loose with a rubber-tipped mallet or carefully cut the sealant with a putty knife and hammer, ensuring not to damage the mating surfaces. Next, remove the two oil pump pickup tube/strainer mounting nuts and the pickup/strainer assembly, followed by the four bolts that attach the flywheel housing cover and the cover itself. Remove the 17 bolts and 2 nuts securing the oil pan to the engine block, along with the 4 stud bolts, and carefully pry the oil pan loose from the engine block, taking care to only pry in the small cutout areas along the side of the pan. For installation, use a scraper to remove all traces of old sealant from the block and oil pan, and clean the mating surfaces with brake system cleaner. Ensure the threaded holes in the block are clean and check the flange of the steel oil pan for distortion around the bolt holes, flattening it if necessary. Inspect the strainer for cracks or blockage, clean it with solvent, and install it using a new gasket, tightening the fasteners to the specific torque. Apply a 1/8 inch bead of RTV sealant to the upper oil pan flange, position the pan onto the block, and install the fasteners, tightening them to the specific torque in several steps while working from the center out. After installing the aluminum portion of the oil pan, apply a bead of RTV sealant to the flange of the No. 2 oil pan, position it on the upper oil pan, and install the bolts, again tightening them to the specific torque in several steps while working from the center out. Finally, the remainder of installation is the reverse of removal; add oil and install a new filter, then run the engine and check for leaks.

Genuine 2008 Toyota Tundra Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Oil Pans found

View related parts
2008 Toyota Tundra Pan Sub-Assy, Oil
Part Number: 12102-AD010
$67.25 MSRP: $94.80
You Save: $27.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Sub-Assy, Oil, NO.2; Lower Oil Pan, Oil Pan
- Manufacturer Note: (L)
- Replaces: 12102-31010
- Part Name Code: 12102A
- Item Weight: 1.90 Pounds
- Item Dimensions: 4.4 x 7.0 x 12.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12102-AD010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLKA, USK51L-CRTSKA, USK51L-PSTLKA, USK51L-PSTSKA, USK51L-THTDKA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-THTDGA, USK56L-THTDKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
2008 Toyota Tundra Pan Sub-Assy, Oil
Part Number: 12102-0S010
$191.97 MSRP: $275.27
You Save: $83.30 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Sub-Assy, Oil, NO.2; Lower Oil Pan, Oil Pan
- Replaces: 12102-38010
- Part Name Code: 12102A
- Item Weight: 2.70 Pounds
- Item Dimensions: 16.8 x 10.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12102-0S010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, Platinum, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, GSK51L-THASKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLGA, USK51L-CRTLKA, USK51L-CRTSGA, USK51L-CRTSKA, USK51L-PSTLGA, USK51L-PSTLKA, USK51L-PSTSGA, USK51L-PSTSKA, USK51L-PSTZGA, USK51L-PSTZKA, USK51L-THTDKA, USK51L-THTSGA, USK51L-THTSKA, USK52L-CHTSGA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-PSTZGA, USK56L-PSTZKA, USK56L-THTDGA, USK56L-THTDKA, USK56L-THTSGA, USK56L-THTSKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
2008 Toyota Tundra Pan Sub-Assembly, Oil
Part Number: 12101-0P030
$252.75 MSRP: $362.42
You Save: $109.67 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Sub-Assy, Oil; Oil Pan, Upper Oil Pan
- Manufacturer Note: (L)
- Replaces: 12101-31071, 12101-31070
- Part Name Code: 12101
- Item Weight: 13.80 Pounds
- Item Dimensions: 23.2 x 20.4 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12101-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLKA, USK51L-CRTSKA, USK51L-PSTLKA, USK51L-PSTSKA, USK51L-THTDKA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-THTDGA, USK56L-THTDKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
2008 Toyota Tundra Pan Sub-Assy, Oil
Part Number: 12102-38010
$191.97 MSRP: $275.27
You Save: $83.30 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Sub-Assy, Oil, NO.2
- Replaced by: 12102-0S010
- Part Name Code: 12102A
- Item Weight: 2.50 Pounds
- Item Dimensions: 16.5 x 10.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12102-38010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, Platinum, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, GSK51L-THASKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLGA, USK51L-CRTLKA, USK51L-CRTSGA, USK51L-CRTSKA, USK51L-PSTLGA, USK51L-PSTLKA, USK51L-PSTSGA, USK51L-PSTSKA, USK51L-PSTZGA, USK51L-PSTZKA, USK51L-THTDKA, USK51L-THTSGA, USK51L-THTSKA, USK52L-CHTSGA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-PSTZGA, USK56L-PSTZKA, USK56L-THTDGA, USK56L-THTDKA, USK56L-THTSGA, USK56L-THTSKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
2008 Toyota Tundra Pan Sub-Assy, Oil
Part Number: 12111-0S010
$211.85 MSRP: $303.77
You Save: $91.92 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan, Upper Oil Pan
- Part Name Code: 12101
- Item Weight: 6.90 Pounds
- Item Dimensions: 18.6 x 13.6 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12111-0S010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLKA, USK51L-CRTSKA, USK51L-PSTLKA, USK51L-PSTSKA, USK51L-THTDKA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-THTDGA, USK56L-THTDKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
2008 Toyota Tundra Pan Sub-Assy, Oil
Part Number: 12111-0F020
$280.82 MSRP: $402.69
You Save: $121.87 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan, Upper Oil Pan
- Part Name Code: 12101
- Item Weight: 6.60 Pounds
- Item Dimensions: 18.4 x 13.1 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12111-0F020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLKA, USK51L-CRTSKA, USK51L-PSTLKA, USK51L-PSTSKA, USK51L-THTDKA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-THTDGA, USK56L-THTDKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
2008 Toyota Tundra Pan Sub-Assy, Oil
Part Number: 12102-0F020
$215.17 MSRP: $308.54
You Save: $93.37 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Sub-Assy, Oil, NO.2; Lower Oil Pan, Oil Pan
- Part Name Code: 12102A
- Item Weight: 6.50 Pounds
- Item Dimensions: 15.9 x 10.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12102-0F020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-PSALKA, UCK51L-PSASKA, UCK51L-THADKA, UCK52L-CHASKA, UCK55L-TRADKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK51L-THTDKA, UPK52L-CHTSKA, UPK55L-TRTDKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK50L-TRTDKA, USK51L-CRTLKA, USK51L-CRTSKA, USK51L-PSTLKA, USK51L-PSTSKA, USK51L-THTDKA, USK52L-CHTSKA, USK55L-TRTDGA, USK55L-TRTDKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-THTDGA, USK56L-THTDKA, USK57L-CHTSGA, USK57L-CHTSKA

2008 Toyota Tundra Oil Pan

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2008 Toyota Tundra Oil Pan, all priced competitively. Feel secure in your purchase, as all our OEM 2008 Toyota Tundra Oil Pan are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to remove and install the oil pan in V6 engine for the 2008 Toyota Tundra?
A: On 4WD models, it will be necessary to either remove the front axle/differential assembly or remove the engine from the vehicle in order to remove the oil pan. Begin by disconnecting the cable from the negative terminal of the battery. Raise the front of the vehicle and place it securely on jackstands. Drain the engine oil and remove the splash shield from underneath the engine. Remove the bolts and nuts that secure oil pan No. 2 (the smaller stamped steel pan) to the larger cast aluminum oil pan, which may be stuck due to RTV sealant; tap it loose with a rubber-tipped mallet or carefully cut the sealant with a putty knife and hammer, ensuring not to damage the mating surfaces. Next, remove the two oil pump pickup tube/strainer mounting nuts and the pickup/strainer assembly, followed by the four bolts that attach the flywheel housing cover and the cover itself. Remove the 17 bolts and 2 nuts securing the oil pan to the engine block, along with the 4 stud bolts, and carefully pry the oil pan loose from the engine block, taking care to only pry in the small cutout areas along the side of the pan. For installation, use a scraper to remove all traces of old sealant from the block and oil pan, and clean the mating surfaces with brake system cleaner. Ensure the threaded holes in the block are clean and check the flange of the steel oil pan for distortion around the bolt holes, flattening it if necessary. Inspect the strainer for cracks or blockage, clean it with solvent, and install it using a new gasket, tightening the fasteners to the specific torque. Apply a 1/8 inch bead of RTV sealant to the upper oil pan flange, position the pan onto the block, and install the fasteners, tightening them to the specific torque in several steps while working from the center out. After installing the aluminum portion of the oil pan, apply a bead of RTV sealant to the flange of the No. 2 oil pan, position it on the upper oil pan, and install the bolts, again tightening them to the specific torque in several steps while working from the center out. Finally, the remainder of installation is the reverse of removal; add oil and install a new filter, then run the engine and check for leaks.