Headlights on all these models are of the sealed beam type, so follow the replacement procedure for these bulbs. In the case of many lights, the lens is usually fixed using screws; to replace the bulbs, one has to remove the lens retainer screws; pull on the lens to disconnect it and twist the bulb in a counter-clockwise direction. Enclosures of some light assemblies share lenses installed in clips, and the clip can be unsnapped or pried off with a small screwdriver. Some bulbs can be pulled out and unscrewed in the opposite direction to install another one while the ones in the instrument cluster need the bulb holder to be twisted anti-clockwise and pulled for removal. The other bulbs are fitted on holders that are released by applying pressure in on the scaling button and turning it in anti-clockwise direction and pulling it out. Furthermore, some segments can be removed by unclipping it from such terminals or even pulling it out from the socket. To perform the procedure of checking the instrument cluster illumination lights, the instrument cluster must be pulled out.