How to Maintain and Service the Front Wheel Bearing and Wheel Hub on a Toyota Land Cruiser?

Regularly check front wheel bearings for issues like noise or movement. If there's movement, inspect and possibly repack or replace the bearings. Remove the wheel, brake caliper, and front locking hub assemblies. Bend back the lock washer tabs, remove the locknuts and thrust washer. Disengage the outer wheel bearing by pulling the hub assembly out and back in. Remove the hub assembly and pry out the seal. Clean the old grease from the bearings, hub, and spindle, inspect for damage, and replace if needed. Pack the bearings with high-temperature grease and apply a thin coat to the spindle. Install the grease-packed bearing into the hub, install a new seal, and tap it into place. Reinstall the hub assembly, thrust washer, and locknuts. Ensure proper bearing preload. Finish by reversing the removal steps and lightly greasing the locking hub assembly.

Genuine Toyota Land Cruiser Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Wheel Bearings found

View related parts
Toyota Land Cruiser Wheel Bearing
Part Number: 90080-36098
$82.59 MSRP: $116.42
You Save: $33.83 (30%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Tapered Roll; Front Wheel Bearing, Inner Bearing
- Position: Front Inner Driver Side
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | 8 Cyl 4.7L | 2UZFE; UZJ100L-GNAEKA, UZJ100L-GNPEKA
View related parts
Toyota Land Cruiser Wheel Bearing
Part Number: 43570-60031
$216.91 MSRP: $311.03
You Save: $94.12 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Axle; Bearing Assembly, Front Wheel Bearing
- Position: Front Passenger Side
- Replaces: 43570-60030
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2008-2021 Toyota Land Cruiser | 8 Cyl 5.7L | 3URFE; URJ200L-GNTEKA, URJ200L-GNZVKA
View related parts
Toyota Land Cruiser Bearing Housing
Part Number: 42450-60070
$338.73 MSRP: $505.32
You Save: $166.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly, Rear Axle, Passenger Side
- Position: Passenger Side
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2008-2021 Toyota Land Cruiser | 8 Cyl 5.7L | 3URFE; URJ200L-GNTEKA, URJ200L-GNZVKA
View related parts
Toyota Land Cruiser Bearing Assembly
Part Number: 43570-60030
$216.91 MSRP: $311.03
You Save: $94.12 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Axle
- Position: Front Driver Side
- Replaced by: 43570-60031
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Land Cruiser | 8 Cyl 5.7L | 3URFE; URJ200L-GNTEKA
View related parts
Toyota Land Cruiser Bearing Housing
Part Number: 42460-60030
$291.61 MSRP: $418.15
You Save: $126.54 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly, Rear Axle, Driver Side
- Position: Driver Side
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2008-2021 Toyota Land Cruiser | 8 Cyl 5.7L | 3URFE; URJ200L-GNTEKA, URJ200L-GNZVKA
View related parts
Toyota Land Cruiser Bearing
Part Number: 90080-36064
$70.79 MSRP: $99.78
You Save: $28.99 (30%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Tapered Roll
- Manufacturer Note: TIMKEN
- Position: Front Inner Driver Side
- Replaced by: 90368-49084
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1994-1997 Toyota Land Cruiser | 6 Cyl 4.5L | 1FZFE; FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Hub Assembly
Part Number: 43502-60190
$199.51 MSRP: $286.08
You Save: $86.57 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Subassembly, Front Axle; Front Hub, Hub Assembly
- Position: Front Driver Side
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2008-2021 Toyota Land Cruiser | 8 Cyl 5.7L | 3URFE; URJ200L-GNTEKA, URJ200L-GNZVKA
View related parts
Toyota Land Cruiser Hub Subassembly Axle
Part Number: 43503-69015
$365.71 MSRP: $545.56
You Save: $179.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Subassembly, Front Axle
- Position: Front Driver Side
- Replaced by: 43503-69035
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | 8 Cyl 4.7L | 2UZFE; UZJ100L-GNAEKA, UZJ100L-GNPEKA
View related parts
Toyota Land Cruiser Axle Bearing
Part Number: 90365-47013
$106.19 MSRP: $149.69
You Save: $43.50 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Axle Bearing, Bearing
- Comment: (FOR REAR AXLE SHAFT)
- Position: Rear
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1973-1996 Toyota Land Cruiser | 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.9L, 6 Cyl 4.0L, 6 Cyl 4.2L, 6 Cyl 4.5L | 1FZFE, 2F, 2H, 3B, 3FE, B, F; BJ40LV-KCJK, BJ42LV-KCJK, BJ42LV-MCJK, BJ60LG-KK, BJ60LG-MK, BJ60LV-KK, BJ70LV-MNK, BJ70LV-MRK, FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-, FJ55LG-KA, FJ55LG-KK, FJ60LG-KA, FJ60LV-KA, FJ60LV-KK, FJ62LG-PNEA, FJ62LG-PNEK, FJ62LV-PNEA, FJ80L-GNPNEA, FZJ80L-GNPEKA, HJ60LG-MK, HJ60LG-PK
View related parts
Toyota Land Cruiser Hub Subassembly Axle
Part Number: 43502-69045
$299.14 MSRP: $428.95
You Save: $129.81 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Subassembly, Front Axle
- Manufacturer Note: W(*66)
- Position: Front
- Replaced by: 43502-69046
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1992-1997 Toyota Land Cruiser | 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Hub Subassembly Axle
Part Number: 43502-60040
$299.14 MSRP: $428.95
You Save: $129.81 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Subassembly, Front Axle
- Position: Front
- Replaced by: 43502-69046
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1991-1995 Toyota Land Cruiser | 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Hub Bearing Assembly Axle
Part Number: 42450-69015
$539.16 MSRP: $805.05
You Save: $265.89 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly, Rear Axle, Passenger Side
- Position: Passenger Side
- Replaced by: 42450-69016
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1994-1997 Toyota Land Cruiser | 6 Cyl 4.5L | 1FZFE; FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Front Axle Hub Outer Right Bearing
Part Number: 90080-36067
$57.94 MSRP: $80.99
You Save: $23.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Tapered Roller ; Bearing (For Front Axle Hub Outer Rh)
- Manufacturer Note: TIMKEN
- Position: Front Outer Passenger Side
- Replaces: 90368-45087
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1975-2007 Toyota Land Cruiser | 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.9L, 6 Cyl 4.0L, 6 Cyl 4.2L, 6 Cyl 4.5L, 8 Cyl 4.7L | 1FZFE, 2F, 2H, 2UZFE; FZJ80L-GNPEKA, 3B, 3FE, B, BJ42LV-KCJK, BJ42LV-MCJK, BJ60LG-KK, BJ60LG-MK, BJ60LV-KK, BJ70LV-MNK, BJ70LV-MRK, F; BJ40LV-KCJK, FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-, FJ55LG-KA, FJ55LG-KK, FJ60LG-KA, FJ60LV-KA, FJ60LV-KK, FJ62LG-PNEA, FJ62LG-PNEK, FJ62LV-PNEA, FJ80L-GNPNEA, FZJ80L-GNPEKA, HJ60LG-MK, HJ60LG-PK, UZJ100L-GNAEKA, UZJ100L-GNPEKA
View related parts
Toyota Land Cruiser Tapered Roller Bearing (For Front Axle Outer Bearing)
Part Number: 90368-45087
$57.94 MSRP: $80.99
You Save: $23.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Tapered Roller (For Front Axle Outer Bearing)
- Position: Front Outer
- Replaced by: 90080-36067
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1975-1997 Toyota Land Cruiser | 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.9L, 6 Cyl 4.0L, 6 Cyl 4.2L, 6 Cyl 4.5L | 1FZFE, 2F, 2H, 3B, 3FE, B, F; BJ40LV-KCJK, BJ42LV-KCJK, BJ42LV-MCJK, BJ60LG-KK, BJ60LG-MK, BJ60LV-KK, BJ70LV-MNK, BJ70LV-MRK, FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-, FJ55LG-KA, FJ55LG-KK, FJ60LG-KA, FJ60LV-KA, FJ60LV-KK, FJ62LG-PNEA, FJ62LG-PNEK, FJ62LV-PNEA, FJ80L-GNPNEA, FZJ80L-GNPEKA, HJ60LG-MK, HJ60LG-PK
View related parts
Toyota Land Cruiser Axle Bearing
Part Number: 90369-48001
$156.77 MSRP: $222.87
You Save: $66.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Axle Bearing, Wheel Bearing
- Position: Rear Passenger Side
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | 8 Cyl 4.7L | 2UZFE; UZJ100L-GNAEKA, UZJ100L-GNPEKA
View related parts
Toyota Land Cruiser Hub
Part Number: 42450-60010
$218.10 MSRP: $312.74
You Save: $94.64 (31%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing Assembly, Rear Axle, Passenger Side
- Position: Passenger Side
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1992-1995 Toyota Land Cruiser | 6 Cyl 4.0L, 6 Cyl 4.5L | 1FZFE, 3FE; FJ80L-GNPNEA, FZJ80L-GNPEKA
View related parts
Toyota Land Cruiser Tapered Roller Bearing (For Front Axle Inner Bearing)
Part Number: 90368-49084
Product Specifications
- Other Name: Bearing, Tapered Roller (For Front Axle Inner Bearing)
- Position: Front Inner
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1975-1997 Toyota Land Cruiser | 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.9L, 6 Cyl 4.0L, 6 Cyl 4.2L, 6 Cyl 4.5L | 1FZFE, 1FZFE; FZJ80L-GNPEKA, 2F, 2H, 3B, 3FE, B, BJ42LV-KCJK, BJ42LV-MCJK, BJ60LG-KK, BJ60LG-MK, BJ60LV-KK, BJ70LV-MNK, BJ70LV-MRK, F; BJ40LV-KCJK, FJ40L-A, FJ40L-KJA, FJ40L-KJK, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ40LV-KCJK, FJ45LP-KK, FJ55LG-, FJ55LG-KA, FJ55LG-KK, FJ60LG-KA, FJ60LV-KA, FJ60LV-KK, FJ62LG-PNEA, FJ62LG-PNEK, FJ62LV-PNEA, FJ80L-GNPNEA, FZJ80L-GNPEKA, HJ60LG-MK, HJ60LG-PK
View related parts
Toyota Land Cruiser Front Axle Hub Sub-Assembly, Right
Part Number: 43502-60020
Product Specifications
- Other Name: Hub, Front Axle, W/O Bearings
- Position: Front
- Replaced by: 43502-69125
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1981-1990 Toyota Land Cruiser | 6 Cyl 3.4L, 6 Cyl 4.0L, 6 Cyl 4.2L | 2F, 2H, 3B, 3FE; BJ42LV-KCJK, BJ42LV-MCJK, BJ60LG-KK, BJ60LG-MK, BJ60LV-KK, BJ70LV-MNK, BJ70LV-MRK, FJ40L-KJA, FJ40LV-KCJA, FJ40LV-KCJK, FJ60LG-KA, FJ60LV-KA, FJ60LV-KK, FJ62LG-PNEA, FJ62LG-PNEK, FJ62LV-PNEA, HJ60LG-MK, HJ60LG-PK
View related parts
Toyota Land Cruiser Front Axle Outer Bearing Tapered Roller Bearing
Part Number: 90368-38003
Product Specifications
- Other Name: Bearing, Tapered Roller (For Front Axle Outer Bearing)
- Comment: (FOR FRONT AXLE OUTER BEARING)
- Position: Front Outer
- Replaces: 90368-38003-85, 97700-02788
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1969-1975 Toyota Land Cruiser | 6 Cyl 3.9L, 6 Cyl 4.2L | 2F, F; FJ40L-A, FJ40L-KJA, FJ40LV-A, FJ40LV-AC, FJ40LV-KCJA, FJ55LG-, FJ55LG-KA
View related parts
Toyota Land Cruiser Rear Axle Shaft Bearing
Part Number: 90365-47005
Product Specifications
- Other Name: Bearing (For Rear Axle Shaft)
- Comment: (FOR REAR AXLE SHAFT)
- Position: Rear
- Replaced by: 90365-47007
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 1969-1974 Toyota Land Cruiser | 6 Cyl 3.9L | F; FJ40L-A, FJ40LV-A, FJ40LV-AC, FJ55LG-

| Page 1 of 2 |Next >

1-20 of 21 Results

Toyota Land Cruiser Wheel Bearing

In Toyota Land Cruiser, the Wheel Bearing is used to improve circulation of the wheels and thus, performance and safety. These bearings are enclosed within the hubs, the parts which attach the wheels to the remainder of the vehicle. The current and the most common design in Toyota Land Cruiser is the unit or integral hub and bearing assembly that might be equipped with the ABS sensor. This type cannot be separated for recycling and has to be replaced as an assembly. In addition, it is possible to have some models that can have non-driven axle hubs that are fitted with replaceable tapered roller bearings. The integrity of the Wheel Bearing must be maintained to the optimal of the vehicle owner's ability because bad bearings cause noise, vibration and in some extreme cases, the detachment of the wheel. In the process of inspection, the shafts should be checked for roughness and play, and where the bearings are to be replaced the shafts must first be cleaned and greased with high temperature wheel bearing grease. End play measurements are changed with reference to manufacturers' recommendations and need to be set right once again upon completion of disassembly and reassembly of bearings.

If you are in demand for superior quality and affordable OEM Toyota Land Cruiser Wheel Bearing, then shop with us! We own a wide range of the reduced-priced genuine Toyota Land Cruiser Wheel Bearing. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Land Cruiser Wheel Bearing Parts Questions & Experts Answers

Tapered Roller Bearing (For Front Axle Inner Bearing)
90368-49084
Q:
How to Maintain and Service the Front Wheel Bearing and Wheel Hub on a Toyota Land Cruiser?
Posted by Marcin S.
A:
Regularly check front wheel bearings for issues like noise or movement. If there's movement, inspect and possibly repack or replace the bearings. Remove the wheel, brake caliper, and front locking hub assemblies. Bend back the lock washer tabs, remove the locknuts and thrust washer. Disengage the outer wheel bearing by pulling the hub assembly out and back in. Remove the hub assembly and pry out the seal. Clean the old grease from the bearings, hub, and spindle, inspect for damage, and replace if needed. Pack the bearings with high-temperature grease and apply a thin coat to the spindle. Install the grease-packed bearing into the hub, install a new seal, and tap it into place. Reinstall the hub assembly, thrust washer, and locknuts. Ensure proper bearing preload. Finish by reversing the removal steps and lightly greasing the locking hub assembly.
Answered by Toyota Parts Specialist Ray / Jun 03, 2025