How to adjust the clutch pedal and push rod on a Toyota MR2?

Press down lightly on the clutch pedal and, with a small steel ruler, measure the distance that it moves freely before the clutch resistance is felt. The free play should be within the specified limits. If it isn't, it must be adjusted. Remove the instrument finish lower panel and air duct. Loosen the lock nut on the pedal end of the clutch push rod. The clutch pedal must be adjusted for push rod play and pedal height - each of these adjustments is accomplished by loosening a locknut and turning a threaded adjuster. Turn the push rod until pedal free play and push rod free play are correct. Tighten the lock nut. After adjusting the pedal free play, check the pedal height. If pedal height is incorrect, loosen the lock nut and turn the stopper bolt until the height is correct. Tighten the lock nut. Install the air duct and instrument finish lower panel.

Genuine Toyota MR2 Clutch Pedal

Floor Clutch Pedal

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

7 Clutch Pedals found

View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31301-17030
$15.64 MSRP: $22.09
You Save: $6.45 (30%)

Add to Cart
More Info
Fits the following Vehicles:
1985-1987 Toyota MR2 | GT | 4 Cyl 1.6L | 4AGELC; 4AGELC; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WJMQFA, AW11L-WJMQFK
Less Info
View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31301-17080
- Replaced by: 31310-17070
$50.10 MSRP: $70.02
You Save: $19.92 (29%)

Add to Cart
More Info
Fits the following Vehicles:
1992-1995 Toyota MR2 | 4 Cyl 2.2L | 5SFE; 5SFE; SW21L-ACMZKA, SW21L-AJMZKA, SW21L-AJMZKK
Less Info
View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31310-17030
More Info
Fits the following Vehicles:
1988-1989 Toyota MR2 | Super Charger | 4 Cyl 1.6L | 4AGZE; 4AGZE; AW11L-WJMQRA, AW11L-WJMQRK
Less Info
View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31301-17031
More Info
Fits the following Vehicles:
1986-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK
Less Info
View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31301-17060
- Replaced by: 31310-17050
More Info
Fits the following Vehicles:
1990-1993 Toyota MR2 | 4 Cyl 2.2L | 5SFE; 5SFE; SW21L-ACMZKA, SW21L-AJMZKA, SW21L-AJMZKK
Less Info
View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31310-17050
- Replaces: 31301-17060
More Info
Fits the following Vehicles:
1990-1993 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; 3SGTE; SW20L-ACMZZA, 5SFE; SW21L-ACMZKA, SW20L-AJMZZA, SW20L-AJMZZK, SW21L-AJMZKA, SW21L-AJMZKK
Less Info
View related parts
Toyota MR2 Pedal Sub-Assy, Clutch
Part Number: 31310-17070
- Replaces: 31301-17080
More Info
Fits the following Vehicles:
1992-1995 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; 3SGTE; SW20L-ACMZZA, 5SFE; SW21L-ACMZKA, SW20L-AJMZZA, SW20L-AJMZZK, SW21L-AJMZKA, SW21L-AJMZKK
Less Info

Toyota MR2 Clutch Pedal Parts Questions & Answers

Pedal Sub-Assy, Clutch
31301-17030
Q: How to adjust the clutch pedal and push rod on a Toyota MR2?
A: Press down lightly on the clutch pedal and, with a small steel ruler, measure the distance that it moves freely before the clutch resistance is felt. The free play should be within the specified limits. If it isn't, it must be adjusted. Remove the instrument finish lower panel and air duct. Loosen the lock nut on the pedal end of the clutch push rod. The clutch pedal must be adjusted for push rod play and pedal height - each of these adjustments is accomplished by loosening a locknut and turning a threaded adjuster. Turn the push rod until pedal free play and push rod free play are correct. Tighten the lock nut. After adjusting the pedal free play, check the pedal height. If pedal height is incorrect, loosen the lock nut and turn the stopper bolt until the height is correct. Tighten the lock nut. Install the air duct and instrument finish lower panel.