How to remove the clutch slave cylinder on Toyota MR2?

To remove the clutch slave cylinder, disconnect the clutch line and bleeder tube, remove the mounting bolts, and pull out the push rod. Tap the cylinder against a block of wood to break the piston loose, and use compressed air if needed. Clean and inspect the cylinder bore for damage, replacing if necessary. Grease or coat the new piston with brake fluid, insert it with the spring, and install the boot and push rod. Secure the cylinder with mounting bolts, connect the bleeder tube and clutch line tightly. Fill the reservoir with brake fluid, bleed the clutch system, and check for leaks.

Genuine Toyota MR2 Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Clutch Slave Cylinders found

View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17030
$82.12 MSRP: $115.75
You Save: $33.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy, Clutch Release; Slave Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1995 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; SW20L-ACMZZA, SW20L-AJMZZA, SW20L-AJMZZK, SW21L-ACMZKA, SW21L-ACPZKA, SW21L-AJMZKA, SW21L-AJMZKK, SW21L-AJPZKA
View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17040
$96.04 MSRP: $135.38
You Save: $39.34 (30%)
Product Specifications
- Other Name: Cylinder Assy, Clutch Release; Slave Cylinder
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1993 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; SW20L-ACMZZA, SW20L-AJMZZA, SW20L-AJMZZK, SW21L-ACMZKA, SW21L-ACPZKA, SW21L-AJMZKA, SW21L-AJMZKK, SW21L-AJPZKA
View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17020
Product Specifications
- Other Name: Cylinder Assy, Clutch Release
- Replaced by: 31470-17022
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA
View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17021
Product Specifications
- Other Name: Cylinder Assy, Clutch Release
- Replaced by: 31470-17022
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA
View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17010
Product Specifications
- Other Name: Cylinder Assy, Clutch Release
- Replaced by: 31470-17011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA
View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17011
Product Specifications
- Other Name: Cylinder Assy, Clutch Release; Slave Cylinder
- Replaces: 31470-17010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA
View related parts
Toyota MR2 Clutch Release Cylinder Assembly
Part Number: 31470-17022
Product Specifications
- Other Name: Cylinder Assy, Clutch Release
- Replaces: 31470-17020, 31470-17021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA

Toyota MR2 Clutch Slave Cylinder

Toyota MR2 has the Clutch Slave Cylinder together with the Clutch Master Cylinder to help in the disengage of the clutch at the time of pressing the pedal to ease the gear changing. This hydraulic component gets pressure from the master cylinder to extend this particular rod to release the clutch. This is why any problem on the clutch slave cylinder causes unsafe transitions from one gear to the other and potential harm to the car's transmission that requires prompt replacement for easy driving and safety. By applying force through the master cylinder in MR2's clutch system, hydraulic pressure is created within the master cylinder that in turn, controls the pressure within the slave cylinder thus pressing the clutch release bearing to disengage the clutch for gear change to be made smoothly.

If you are in demand for superior quality and affordable OEM Toyota MR2 Clutch Slave Cylinder, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 Clutch Slave Cylinder. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota MR2 Clutch Slave Cylinder Parts Questions & Experts Answers

Clutch Release Cylinder Assembly
31470-17010
Q: How to remove the clutch slave cylinder on Toyota MR2?
A:
To remove the clutch slave cylinder, disconnect the clutch line and bleeder tube, remove the mounting bolts, and pull out the push rod. Tap the cylinder against a block of wood to break the piston loose, and use compressed air if needed. Clean and inspect the cylinder bore for damage, replacing if necessary. Grease or coat the new piston with brake fluid, insert it with the spring, and install the boot and push rod. Secure the cylinder with mounting bolts, connect the bleeder tube and clutch line tightly. Fill the reservoir with brake fluid, bleed the clutch system, and check for leaks.