My Garage
My Account
Cart
Genuine Toyota MR2 Sway Bar Kit
Stabilizer Sway Bar Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
17 Sway Bar Kits found
Toyota MR2 Sway Bar Kit
The Sway Bar Kit is considered among the highly reliable and performing enhancing tune-ups for the Toyota MR2. In this feature, this particular Sway Bar Kit is highly useful in controlling the body roll during cornering and navigating through rough terrains so as to provide a steady traction on the Toyota. This Sway Bar Kit can be applied for the first generation W10 MR2, the second generation W20, and the third generation W30 to correct them in order to optimize the efficiency and safety of the vehicle to get through the corner. The Sway Bar Kit employs an enhanced design that enhances roll stiffness while maintaining the same spring vertical rate, hence increasing the lack of lateral tilt, thus enhanced handling. On the same note, it is worthy of note that the Sway Bar Kit incorporates an adjustable feature whereby stiffness is varied depending on the handling conditions of the Toyota MR2. This versatility of some models has made it stand out in the automotive industry, reflecting the everyday driver and the user who seeks extra power. Based on positive client feedback and new functions, the Sway Bar Kit does not only improve the driving experience but also solidifies the Toyota as one of the optimal sports cars. Whether it is a winding road or simply a joy ride, the MR2 Sway Bar Kit is designed to increase or improve the performance of your Toyota in geometrical terms for enhanced safety.
If you are in demand for superior quality and affordable OEM Toyota MR2 Sway Bar Kit, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 Sway Bar Kit. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota MR2 Sway Bar Kit Parts Questions & Experts Answers
- Q: How to remove and inspect the Sway Bar Kit and Sway Bar Link on Toyota MR2?A:Raise the front of the vehicle and support it on jackstands, then remove the nut to disconnect the sway bar link from the sway bar. For 1986 and 1987 models, if the ball joint stud turns with the nut, use a wrench to hold the stud while removing the nut. Next, remove the nut to separate the link from the front strut assembly. After that, take out the bolts from the two sway bar brackets to free the brackets and sway bar cushions. Carefully inspect the sway bar link by rotating the ball joints in all directions; if the movement is not smooth and free, replace the sway bar link. Finally, installation follows the reverse order of removal, ensuring all connections are tightened to the specified torque.
