My Garage
My Account
Cart
Genuine Toyota MR2 Wheel Seal
Wheel Axle Seal- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
14 Wheel Seals found
Toyota MR2 Seal, Oil
Part Number: 90311-35019$14.98 MSRP: $20.94You Save: $5.96 (29%)Ships in 1-3 Business Days
Toyota MR2 Seal, Oil
Part Number: 90311-34012$10.31 MSRP: $14.41You Save: $4.10 (29%)Ships in 1-3 Business Days
Toyota MR2 Cover, Dust
Part Number: 41336-12010$2.24 MSRP: $3.13You Save: $0.89 (29%)Ships in 1-2 Business Days
Toyota MR2 Seal, Oil
Part Number: 90311-42018$7.46 MSRP: $10.43You Save: $2.97 (29%)Ships in 1-3 Business Days
Toyota MR2 Cover, Dust
Part Number: 41336-32020$5.99 MSRP: $8.36You Save: $2.37 (29%)Ships in 1-2 Business Days
Toyota MR2 Seal Kit, Front Axle Oil
Part Number: 04422-32010$50.75 MSRP: $70.95You Save: $20.20 (29%)Ships in 1-3 Business Days
Toyota MR2 Seal, Oil
Part Number: 90311-35026$14.98 MSRP: $20.94You Save: $5.96 (29%)Ships in 1-2 Business Days
Toyota MR2 Seal, Oil
Part Number: 90311-35014$14.98 MSRP: $20.94You Save: $5.96 (29%)Ships in 1-2 Business Days
Toyota MR2 Seal, Oil
Part Number: 90311-35010$14.98 MSRP: $20.94You Save: $5.96 (29%)Ships in 1 Business Day
Toyota MR2 Seal, Oil
Part Number: 90311-34005$10.31 MSRP: $14.41You Save: $4.10 (29%)Ships in 1-3 Business Days
Toyota MR2 Cover, Dust
Part Number: 41336-32010$3.72 MSRP: $5.20You Save: $1.48 (29%)Ships in 1-3 Business Days
Toyota MR2 Wheel Seal
The Wheel Seal of Toyota MR2 vehicles is vital in protecting the hub and bearing from things such as rocks, debris, dirt, and other things in that category. Another factor which may be detrimental to the welfare of the shafts is the admission of improper lubrication which causes heating up and subsequent brittleness. It is advised to look for leaks or cracks to guarantee the prime conditions of the apparatus. From the varieties such as the front and rear inner and outer wheel seals, Motorcraft and Timken brands are the leading manufacturers. They are manufactured with high grade and have tight slits to form a tight seal to the parts they come into contact with thus enhancing the durability of the wheel bearing assembly.
If you are in demand for superior quality and affordable OEM Toyota MR2 Wheel Seal, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 Wheel Seal. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota MR2 Wheel Seal Parts Questions & Experts Answers
- Q: How to replace the wheel seal on Toyota MR2?A: Drain approximately one liter of fluid from the differential, then remove the driveaxle. Push the wheel seal into the differential as far as it will go and measure the distance between the transaxle case and the wheel seal to ensure proper reassembly. Use a slide hammer to drive out the wheel seal, and employ a two-jaw puller and slide hammer to remove the old seal from the bore in the differential; if these tools are unavailable, a large screwdriver can be used with caution to avoid damaging the seal bore. Drive in a new seal with a large socket slightly smaller than the outside diameter of the seal and coat the lip of the new seal with multipurpose grease. Install a new snap ring into the groove of the wheel seal and carefully tap the wheel seal into the differential with a plastic or rubber mallet until it contacts the pinion shaft, indicated by a change in sound. Measure wheel seal end play using a dial gauge by pushing the seal all the way into the differential, zeroing the gauge against the face of the wheel seal flange, and pulling the seal out until it binds, ensuring there is 2 to 3 mm (0.08 to 0.12 in) of end play. Verify that the wheel seal will not come out by pulling hard on the flange, then push the wheel seal all the way into the differential and measure the distance between the wheel seal and the transaxle case, comparing it with the previous measurement to confirm they are the same. Finally, install the driveaxle and fill the differential with ATF Dexron II fluid to the specified level.
