How to adjust the Shift Cable on Toyota T100?

To adjust the Automatic Transmission Shift Levers, start by moving it from the Neutral position to the other gear positions to ensure smooth and precise shifting. If the gear position indicator is not aligned correctly, follow the steps to adjust the linkage. This involves raising the vehicle, loosening the nut that attaches the shift cable to the manual lever, and pushing the lever forward until it stops. Then, push the lever back two clicks to the Neutral position and tighten the nut while an assistant holds the shift lever in the Neutral position. The Neutral Safety Switch should also be adjusted. To replace the shift cable, remove the upper and lower steering column covers and the left lower finish panel. Detach the upper end of the shift cable from the steering column and remove the retainer clip to disengage the cable from the cable bracket. Raise the vehicle, remove the nut attaching the shift cable to the manual lever, and disconnect the shift cable. Remove any cable retaining clamps or clips and pull the cable through the firewall. Installation is the reverse of removal, and the shift cable should be adjusted following the previous steps.

Genuine Toyota T100 Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

View related parts
Toyota T100 Cable Assembly, Parking Lock
Part Number: 33880-35011
Product Specifications
- Other Name: Cable Assy, Parking Lock (For Column Shift)
- Comment: (FOR COLUMN SHIFT)
- Replaces: 33880-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1998 Toyota T100 | DLX, SR5, STD | 4 Cyl 2.7L, 6 Cyl 3.0L, 6 Cyl 3.4L | 3RZFE, 3VZE, 5VZFE; RCK10L-TRMRKA, RCK10L-TRSRKA, VCK10L-THMREA, VCK10L-THSREA, VCK10L-TRMREA, VCK10L-TRMREK, VCK10L-TRMSEA, VCK10L-TRMSEK, VCK10L-TRSREA, VCK10L-TRSREK, VCK10L-TRSSEA, VCK10L-TRSSEK, VCK11L-CRMDKA, VCK11L-CRMDKK, VCK11L-CRMSKA, VCK11L-CRSDKA, VCK11L-CRSDKK, VCK11L-CRSSKA, VCK11L-THMDKA, VCK11L-THSDKA, VCK11L-TRMDKA, VCK11L-TRMDKK, VCK11L-TRMRKA, VCK11L-TRMSKA, VCK11L-TRSDKA, VCK11L-TRSDKK, VCK11L-TRSSKA, VCK20L-TRMREA, VCK20L-TRMREK, VCK20L-TRMSEA, VCK20L-TRMSEK, VCK20L-TRSREA, VCK20L-TRSREK, VCK20L-TRSSEA, VCK20L-TRSSEK, VCK21L-CRMDKA, VCK21L-CRMDKK, VCK21L-CRMSKA, VCK21L-CRMSKK, VCK21L-CRSDKA, VCK21L-CRSDKK, VCK21L-CRSSKA, VCK21L-CRSSKK, VCK21L-TRMDKA, VCK21L-TRMDKK, VCK21L-TRMSKA, VCK21L-TRMSKK, VCK21L-TRSDKA, VCK21L-TRSDKK, VCK21L-TRSSKA, VCK21L-TRSSKK

Toyota T100 Shift Cable

The Toyota T100 Shift Cable connects the shifter in the cabin to the transmission, allowing smooth shifting and enabling the driver to control the transmission. T100 in the early days had manual gearboxes with rigid linkage rods, but the design was changed later on. A flexible Shift Cable was applied that helped routing through tight spaces and it was also resistant to road grime. Whether you have a column or floor mounted shifter, the Shift Cable transmits the movement of the lever in push-or-pull style to the transmission manual lever in federally mandated PRNDL order for automatics or familiar H-pattern for manuals, smoothly engaging the gears without unwanted play. A worn Shift Cable can stretch, bend, or even snap, causing loose feel, refusal to enter gear, or jumping out of gear. All these issues disappear once a new Shift Cable is fitted and properly torqued, maintaining Toyota reliability. While no separate styles for different body trims have been documented, there are, in fact, two core categories, one for automatic selector duty and one for manual shift action. The automatic version features safety interlock compatibility, while the manual variant focuses on direct, positive feedback for the driver. This applies to every Toyota T100 model year.

If you are in demand for superior quality and affordable OEM Toyota T100 Shift Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Shift Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota T100 Shift Cable Parts Questions & Experts Answers

Cable Assembly, Parking Lock
33880-35011
Q: How to adjust the Shift Cable on Toyota T100?
A:
To adjust the Automatic Transmission Shift Levers, start by moving it from the Neutral position to the other gear positions to ensure smooth and precise shifting. If the gear position indicator is not aligned correctly, follow the steps to adjust the linkage. This involves raising the vehicle, loosening the nut that attaches the shift cable to the manual lever, and pushing the lever forward until it stops. Then, push the lever back two clicks to the Neutral position and tighten the nut while an assistant holds the shift lever in the Neutral position. The Neutral Safety Switch should also be adjusted. To replace the shift cable, remove the upper and lower steering column covers and the left lower finish panel. Detach the upper end of the shift cable from the steering column and remove the retainer clip to disengage the cable from the cable bracket. Raise the vehicle, remove the nut attaching the shift cable to the manual lever, and disconnect the shift cable. Remove any cable retaining clamps or clips and pull the cable through the firewall. Installation is the reverse of removal, and the shift cable should be adjusted following the previous steps.