Toyota 44310-52020 Power Steering Pump

Only models with the hydraulic power steering system have a pump. To remove the power steering pump, first remove the drivebelt. Next, at the back of the engine, disconnect the wiring harness from the side of the reservoir and the power steering return hose from the pump, being prepared for some fluid loss and plugging or covering the pipe ends. Then, working beneath the vehicle, disconnect the power steering pressure switch and remove the belt adjuster bolt from the pump, rotating the pump pulley if necessary to make the bolt head visible. After that, remove the top pivot bolt from the engine and carefully manoeuvre the power steering pump out. For refitting, reverse the removal process, ensuring to tighten all fixings to the specified torque, refit the auxiliary drivebelt, and finally fill and bleed the power steering system upon completion.