Where is the remote control mirror switch located and how do you check or replace it on Toyota MR2?

The remote control mirror switch is located on the left side of the instrument cluster finish panel, just to the left of the steering column. To check or replace the switch, first remove the instrument cluster finish panel. Pull it down far enough to unplug the electrical connector from the switch. Using an ohmmeter, check the switch continuity between terminals; if continuity is not as specified, replace the switch. To replace the switch, push in the tabs on the top and bottom of the switch housing and pull it from the back of the instrument cluster finish panel. Installation is the reverse of removal.

Genuine Toyota MR2 Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mirror Switches found

View related parts
Toyota MR2 Outer Mirror Switch Assembly
Part Number: 84870-17030
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1995 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; SW20L-ACMZZA, SW20L-AJMZZA, SW20L-AJMZZK, SW21L-ACMZKA, SW21L-ACPZKA, SW21L-AJMZKA, SW21L-AJMZKK, SW21L-AJPZKA
View related parts
Toyota MR2 Outer Mirror Switch Assembly
Part Number: 84870-17010
Product Specifications
- Other Name: Switch Assy, Outer Mirror
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA

Toyota MR2 Mirror Switch

The Toyota MR2 Mirror Switch allows the driver to adjust the side-view mirrors from the inside. The Mirror Switch is well-placed on the door for easy access by the driver. It contains directional control that powers an internal motor located in each housing of the mirror that allows the glass to tilt up and down and left and right after the driver moves the toggle left or right to select which mirror. This single Mirror Switch substitutes for earlier cable-based systems and allows the occupant of the Toyota MR2 to adjust mirror position without leaving the seat. The mirror-selection button on the control pad is a simple one. It sends power to the selected mirror. Then it is the four-way pad that directs it to the optimal sight lines. The design allows adjustment of both exterior mirrors from one point, conveniently set up when more than one person drives the Toyota MR2. On some vehicles, the mirror-fold command may share the space of the Mirror Switch, although the main focus of the Toyota MR2 is angle adjustments which are handled through the Mirror Switch.

If you are in demand for superior quality and affordable OEM Toyota MR2 Mirror Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 Mirror Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota MR2 Mirror Switch Parts Questions & Experts Answers

Outer Mirror Switch Assembly
84870-17010
Q: Where is the remote control mirror switch located and how do you check or replace it on Toyota MR2?
A:
The remote control mirror switch is located on the left side of the instrument cluster finish panel, just to the left of the steering column. To check or replace the switch, first remove the instrument cluster finish panel. Pull it down far enough to unplug the electrical connector from the switch. Using an ohmmeter, check the switch continuity between terminals; if continuity is not as specified, replace the switch. To replace the switch, push in the tabs on the top and bottom of the switch housing and pull it from the back of the instrument cluster finish panel. Installation is the reverse of removal.