Q: How to Remove and Install Suspension Strut Rod on Toyota MR2?
A: Raise the front of the vehicle and support it on jackstands. Measure the distance from the retainer nut to the strut bar-to-lower arm retaining bolt, noting the length for reassembly and checking the approximate length in the Specifications. Remove the nut to release the front retainer and cushion. Loosen the adjusting nut, then disconnect the strut bar from the lower arm and separate the lower arm from the strut bar. To install the strut bar, reverse the removal procedure, turning the adjusting nut to reach the previously measured length, and tighten all nuts to the specified torque.